View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0001458 | channel: elrepo/el8 | kmod-isci | public | 2024-06-11 07:28 | 2024-07-12 18:45 |
| Reporter | i4041 | Assigned To | tqhoang | ||
| Priority | normal | Severity | minor | Reproducibility | always |
| Status | closed | Resolution | no change required | ||
| Summary | 0001458: EL 8.10 isci module and DUD | ||||
| Description | Hi: I tried to load isci 8.10 DUD at RHEL 8.10 kernel 4.18.0-553-el8_10.x86_64 but failed (many unknown symbols). Could the module and DUD rebuild against EL8.10? I'm lost here. Thanks for the help! | ||||
| Tags | No tags attached. | ||||
|
|
Please can you show us some of the missing symbols - we don't need all, just a few will do to help diagnose the issue. Thanks |
|
|
Thank you for the quick response. I've attached a screenshot of the output of dmesg regarding the DUD installation of dd-isci-1.2.0-14.el8_10.elrepo.iso. Again thanks. |
|
|
Are you using the final release version of RHEL 8.10? Can you send the output for these commands? 1. cat /etc/redhat-release 2. uname -r 3. rpm -q kernel 4. dmesg (full dmesg output) |
|
|
Hi, Yes I'm using the lates version available in the web page of RHEL. I attach the output of the commands requested. The command rpm -q kernel don't throw "package kernel is not installed", because the system is not installed, its in the process of being installed, but don't detect the hard drive. Thank you very much! dmesgoutput.txt (77,000 bytes)
[ 0.000000] Linux version 4.18.0-553.el8_10.x86_64 (mockbuild@x86-vm-09.brew-001.prod.iad2.dc.redhat.com) (gcc version 8.5.0 20210514 (Red Hat 8.5.0-21) (GCC)) #1 SMP Fri May 10 15:19:13 EDT 2024
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz initrd=initrd.img inst.stage2=hd:LABEL=RHEL-8-10-0-BaseOS-x86_64 quiet inst.dd
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007da77fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007da78000-0x000000007dac5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007dac6000-0x000000007db60fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007db61000-0x000000007dd79fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dd7a000-0x000000007f353fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f354000-0x000000007f354fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f355000-0x000000007f3dafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f3db000-0x000000007f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: FUJITSU PRIMERGY RX200 S7/D3032-A1, BIOS V4.6.5.3 R2.30.0 for D3032-A1x 06/24/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2000.031 MHz processor
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x2080000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EAFFF uncachable
[ 0.000000] EB000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask 3FE000000000 write-back
[ 0.000000] 1 base 002000000000 mask 3FFF80000000 write-back
[ 0.000000] 2 base 000080000000 mask 3FFF80000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 131072M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdf20-0x000fdf2f]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x26c401000, 0x26c401fff] PGTABLE
[ 0.000000] BRK [0x26c402000, 0x26c402fff] PGTABLE
[ 0.000000] BRK [0x26c403000, 0x26c403fff] PGTABLE
[ 0.000000] BRK [0x26c404000, 0x26c404fff] PGTABLE
[ 0.000000] BRK [0x26c405000, 0x26c405fff] PGTABLE
[ 0.000000] BRK [0x26c406000, 0x26c406fff] PGTABLE
[ 0.000000] BRK [0x26c407000, 0x26c407fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x78362000-0x7da77fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 FTS )
[ 0.000000] ACPI: XSDT 0x000000007DAE4088 000094 (v01 FTS D3032-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007DAEF328 0000F4 (v04 FTS D3032-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007DAE41B0 00B176 (v02 FTS D3032-A1 00000017 INTL 20091112)
[ 0.000000] ACPI: FACS 0x000000007DD77F80 000040
[ 0.000000] ACPI: APIC 0x000000007DAEF420 0001B4 (v03 FTS D3032-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007DAEF5D8 000044 (v01 FTS D3032-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007DAEF620 00003C (v01 FTS OEMMCFG. 01072009 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000007DAEF660 000430 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
[ 0.000000] ACPI: SLIT 0x000000007DAEFA90 000030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
[ 0.000000] ACPI: HPET 0x000000007DAEFAC0 000038 (v01 FTS D3032-A1 01072009 AMI. 00000005)
[ 0.000000] ACPI: SPMI 0x000000007DAEFAF8 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
[ 0.000000] ACPI: SSDT 0x000000007DAEFB38 070104 (v02 INTEL CpuPm 00004000 INTL 20051117)
[ 0.000000] ACPI: EINJ 0x000000007DB5FC40 000130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 0x000000007DB5FD70 000230 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 0x000000007DB5FFA0 0000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 0x000000007DB60048 000030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: DMAR 0x000000007DB60078 0000F8 (v01 A M I OEMDMAR 00000001 INTL 00000001)
[ 0.000000] ACPI: Reserving FACP table memory at [mem 0x7daef328-0x7daef41b]
[ 0.000000] ACPI: Reserving DSDT table memory at [mem 0x7dae41b0-0x7daef325]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0x7dd77f80-0x7dd77fbf]
[ 0.000000] ACPI: Reserving APIC table memory at [mem 0x7daef420-0x7daef5d3]
[ 0.000000] ACPI: Reserving FPDT table memory at [mem 0x7daef5d8-0x7daef61b]
[ 0.000000] ACPI: Reserving MCFG table memory at [mem 0x7daef620-0x7daef65b]
[ 0.000000] ACPI: Reserving SRAT table memory at [mem 0x7daef660-0x7daefa8f]
[ 0.000000] ACPI: Reserving SLIT table memory at [mem 0x7daefa90-0x7daefabf]
[ 0.000000] ACPI: Reserving HPET table memory at [mem 0x7daefac0-0x7daefaf7]
[ 0.000000] ACPI: Reserving SPMI table memory at [mem 0x7daefaf8-0x7daefb37]
[ 0.000000] ACPI: Reserving SSDT table memory at [mem 0x7daefb38-0x7db5fc3b]
[ 0.000000] ACPI: Reserving EINJ table memory at [mem 0x7db5fc40-0x7db5fd6f]
[ 0.000000] ACPI: Reserving ERST table memory at [mem 0x7db5fd70-0x7db5ff9f]
[ 0.000000] ACPI: Reserving HEST table memory at [mem 0x7db5ffa0-0x7db60047]
[ 0.000000] ACPI: Reserving BERT table memory at [mem 0x7db60048-0x7db60077]
[ 0.000000] ACPI: Reserving DMAR table memory at [mem 0x7db60078-0x7db6016f]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x26 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x27 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x28 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x29 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x2a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x2b -> Node 1
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=2
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x107ffd5000-0x107fffffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x207ffd4000-0x207fffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000207fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007da77fff]
[ 0.000000] node 0: [mem 0x000000007f354000-0x000000007f354fff]
[ 0.000000] node 0: [mem 0x000000007f3db000-0x000000007f7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000107fffffff]
[ 0.000000] node 1: [mem 0x0000001080000000-0x000000207fffffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 8658 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
[ 0.000000] On node 0 totalpages: 16768558
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 144 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7995 pages used for memmap
[ 0.000000] DMA32 zone: 511646 pages, LIFO batch:63
[ 0.000000] Normal zone: 253952 pages used for memmap
[ 0.000000] Normal zone: 16252928 pages, LIFO batch:63
[ 0.000000] Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
[ 0.000000] On node 1 totalpages: 16777216
[ 0.000000] Normal zone: 262144 pages used for memmap
[ 0.000000] Normal zone: 16777216 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] TSC deadline timer available
[ 0.000000] smpboot: Allowing 24 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7da78000-0x7dac5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7dac6000-0x7db60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7db61000-0x7dd79fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7dd7a000-0x7f353fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f355000-0x7f3dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0x90000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
[ 0.000000] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 12 13 [0] 14 15 16 17 -- -- -- --
[ 0.000000] pcpu-alloc: [1] 06 07 08 09 10 11 18 19 [1] 20 21 22 23 -- -- -- --
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 33021475
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=vmlinuz initrd=initrd.img inst.stage2=hd:LABEL=RHEL-8-10-0-BaseOS-x86_64 quiet inst.dd
[ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com.
[ 0.000000] software IO TLB: area num 32.
[ 0.000000] Memory: 2169376K/134183096K available (14339K kernel code, 5957K rwdata, 8568K rodata, 2820K init, 13792K bss, 2313256K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x32/0x460 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 41053 entries in 161 pages
[ 0.000000] ftrace: allocated 161 pages with 3 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1432, preallocated irqs: 16
[ 0.001000] Console: colour VGA+ 80x25
[ 0.001000] printk: console [tty0] enabled
[ 0.001000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.001000] ACPI: Core revision 20220331
[ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.001000] hpet clockevent registered
[ 0.001000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] DMAR: Host address width 46
[ 0.001000] DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
[ 0.001000] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
[ 0.001000] DMAR: DRHD base: 0x000000dfffc000 flags: 0x1
[ 0.001000] DMAR: dmar1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
[ 0.001000] DMAR: RMRR base: 0x0000007da8c000 end: 0x0000007daa8fff
[ 0.001000] DMAR: ATSR flags: 0x0
[ 0.001000] DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
[ 0.001000] DMAR: RHSA base: 0x000000dfffc000 proximity domain: 0x0
[ 0.001000] DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
[ 0.001000] DMAR-IR: IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 1
[ 0.001000] DMAR-IR: IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 1
[ 0.001000] DMAR-IR: HPET id 0 under DRHD base 0xdfffc000
[ 0.001000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.001000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.001000] x2apic enabled
[ 0.001000] Switched APIC routing to cluster x2apic.
[ 0.001492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006012] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd44b86073, max_idle_ns: 440795263828 ns
[ 0.006017] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.06 BogoMIPS (lpj=2000031)
[ 0.006021] pid_max: default: 32768 minimum: 301
[ 0.006110] LSM: Security Framework initializing
[ 0.006130] Yama: becoming mindful.
[ 0.006141] SELinux: Initializing.
[ 0.006208] LSM support for eBPF active
[ 0.020567] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
[ 0.027776] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
[ 0.028059] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ 0.028285] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ 0.028852] CPU0: Thermal monitoring enabled (TM1)
[ 0.028917] process: using mwait in idle threads
[ 0.028921] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.028923] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.028930] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.028933] Spectre V2 : Mitigation: Retpolines
[ 0.028934] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.028936] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.028937] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.028939] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.028941] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.028943] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.028948] MDS: Mitigation: Clear CPU buffers
[ 0.028949] MMIO Stale Data: Unknown: No mitigations
[ 0.047249] Freeing SMP alternatives memory: 36K
[ 0.047570] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.047582] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (family: 0x6, model: 0x2d, stepping: 0x7)
[ 0.047872] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.047885] ... version: 3
[ 0.047886] ... bit width: 48
[ 0.047888] ... generic registers: 4
[ 0.047889] ... value mask: 0000ffffffffffff
[ 0.047890] ... max period: 00007fffffffffff
[ 0.047892] ... fixed-purpose events: 3
[ 0.047893] ... event mask: 000000070000000f
[ 0.047969] rcu: Hierarchical SRCU implementation.
[ 0.050643] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.050670] smp: Bringing up secondary CPUs ...
[ 0.050846] x86: Booting SMP configuration:
[ 0.050848] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.061289] .... node #1, CPUs: #6
[ 0.001000] smpboot: CPU 6 Converting physical 0 to logical die 1
[ 0.123230] #7 #8 #9 #10 #11
[ 0.133224] .... node #0, CPUs: #12
[ 0.135198] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.135294] #13 #14 #15 #16 #17
[ 0.145275] .... node #1, CPUs: #18 #19 #20 #21 #22 #23
[ 0.157103] smp: Brought up 2 nodes, 24 CPUs
[ 0.157103] smpboot: Max logical packages: 2
[ 0.157103] smpboot: Total of 24 processors activated (96083.42 BogoMIPS)
[ 0.243174] node 1 deferred pages initialised in 84ms
[ 0.247765] node 0 deferred pages initialised in 88ms
[ 0.255614] devtmpfs: initialized
[ 0.255614] x86/mm: Memory block size: 2048MB
[ 0.257079] ACPI: PM: Registering ACPI NVS region [mem 0x7db61000-0x7dd79fff] (2199552 bytes)
[ 0.257155] ACPI: PM: Registering ACPI NVS region [mem 0x7f355000-0x7f3dafff] (548864 bytes)
[ 0.257251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.257299] futex hash table entries: 8192 (order: 7, 524288 bytes, vmalloc)
[ 0.257530] pinctrl core: initialized pinctrl subsystem
[ 0.258237] NET: Registered protocol family 16
[ 0.258426] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.258442] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.258455] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.258477] audit: initializing netlink subsys (disabled)
[ 0.258489] audit: type=2000 audit(1718259206.258:1): state=initialized audit_enabled=0 res=1
[ 0.259005] cpuidle: using governor menu
[ 0.259101] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.259104] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.259247] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ 0.259254] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ 0.259285] PCI: Using configuration type 1 for base access
[ 0.259332] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.263131] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.263131] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264057] cryptd: max_cpu_qlen set to 1000
[ 0.264159] ACPI: Added _OSI(Module Device)
[ 0.264162] ACPI: Added _OSI(Processor Device)
[ 0.264163] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.264165] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336640] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.359540] ACPI: Interpreter enabled
[ 0.359560] ACPI: PM: (supports S0 S1 S4 S5)
[ 0.359562] ACPI: Using IOAPIC for interrupt routing
[ 0.362198] HEST: Table parsing has been initialized.
[ 0.362325] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 0.362329] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.362756] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.375462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.375472] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.375556] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.375695] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.375697] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.376089] PCI host bridge to bus 0000:00
[ 0.376092] pci_bus 0000:00: Unknown NUMA node; performance will be reduced
[ 0.376095] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.376098] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.376100] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.376103] pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
[ 0.376105] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.376108] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.376110] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.376117] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.376150] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
[ 0.376233] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.376345] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
[ 0.376442] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.376770] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
[ 0.376868] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.377181] pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
[ 0.377277] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.377582] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
[ 0.377622] pci 0000:00:03.0: enabling Extended Tags
[ 0.377682] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.377983] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
[ 0.378127] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
[ 0.378256] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
[ 0.378269] pci 0000:00:05.4: reg 0x10: [mem 0xdfb07000-0xdfb07fff]
[ 0.378403] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[ 0.378522] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 0.378683] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[ 0.378701] pci 0000:00:1a.0: reg 0x10: [mem 0xdfb03000-0xdfb033ff]
[ 0.378792] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.378915] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[ 0.379013] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.379158] pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
[ 0.379255] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.379403] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[ 0.379421] pci 0000:00:1d.0: reg 0x10: [mem 0xdfb02000-0xdfb023ff]
[ 0.379512] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.379648] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.379770] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[ 0.380005] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
[ 0.380020] pci 0000:00:1f.2: reg 0x10: [io 0x9070-0x9077]
[ 0.380029] pci 0000:00:1f.2: reg 0x14: [io 0x9060-0x9063]
[ 0.380037] pci 0000:00:1f.2: reg 0x18: [io 0x9050-0x9057]
[ 0.380046] pci 0000:00:1f.2: reg 0x1c: [io 0x9040-0x9043]
[ 0.380054] pci 0000:00:1f.2: reg 0x20: [io 0x9020-0x903f]
[ 0.380063] pci 0000:00:1f.2: reg 0x24: [mem 0xdfb01000-0xdfb017ff]
[ 0.380108] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.380226] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
[ 0.380245] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb00000-0xdfb000ff 64bit]
[ 0.380267] pci 0000:00:1f.3: reg 0x20: [io 0x9000-0x901f]
[ 0.380425] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.380490] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.380545] pci 0000:00:02.2: PCI bridge to [bus 03]
[ 0.380606] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 0.380692] pci 0000:05:00.0: [8086:1d6b] type 00 class 0x010700
[ 0.380716] pci 0000:05:00.0: reg 0x10: [mem 0xddc7c000-0xddc7ffff 64bit pref]
[ 0.380733] pci 0000:05:00.0: reg 0x18: [mem 0xdd800000-0xddbfffff 64bit pref]
[ 0.380744] pci 0000:05:00.0: reg 0x20: [io 0x8000-0x80ff]
[ 0.380772] pci 0000:05:00.0: enabling Extended Tags
[ 0.380878] pci 0000:05:00.0: reg 0x164: [mem 0xddc00000-0xddc03fff 64bit pref]
[ 0.380880] pci 0000:05:00.0: VF(n) BAR0 space: [mem 0xddc00000-0xddc7bfff 64bit pref] (contains BAR0 for 31 VFs)
[ 0.381324] pci 0000:00:11.0: PCI bridge to [bus 05]
[ 0.381329] pci 0000:00:11.0: bridge window [io 0x8000-0x8fff]
[ 0.381334] pci 0000:00:11.0: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.381341] pci 0000:00:11.0: bridge window [mem 0xdd800000-0xddcfffff 64bit pref]
[ 0.381449] pci 0000:06:00.0: [8086:1521] type 00 class 0x020000
[ 0.381475] pci 0000:06:00.0: reg 0x10: [mem 0xdf920000-0xdf93ffff]
[ 0.381502] pci 0000:06:00.0: reg 0x18: [io 0x7020-0x703f]
[ 0.381517] pci 0000:06:00.0: reg 0x1c: [mem 0xdf9c4000-0xdf9c7fff]
[ 0.381685] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.381729] pci 0000:06:00.0: reg 0x184: [mem 0xdf9a0000-0xdf9a3fff]
[ 0.381732] pci 0000:06:00.0: VF(n) BAR0 space: [mem 0xdf9a0000-0xdf9bffff] (contains BAR0 for 8 VFs)
[ 0.381768] pci 0000:06:00.0: reg 0x190: [mem 0xdf980000-0xdf983fff]
[ 0.381770] pci 0000:06:00.0: VF(n) BAR3 space: [mem 0xdf980000-0xdf99ffff] (contains BAR3 for 8 VFs)
[ 0.382219] pci 0000:06:00.1: [8086:1521] type 00 class 0x020000
[ 0.382245] pci 0000:06:00.1: reg 0x10: [mem 0xdf900000-0xdf91ffff]
[ 0.382272] pci 0000:06:00.1: reg 0x18: [io 0x7000-0x701f]
[ 0.382287] pci 0000:06:00.1: reg 0x1c: [mem 0xdf9c0000-0xdf9c3fff]
[ 0.382448] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.382490] pci 0000:06:00.1: reg 0x184: [mem 0xdf960000-0xdf963fff]
[ 0.382493] pci 0000:06:00.1: VF(n) BAR0 space: [mem 0xdf960000-0xdf97ffff] (contains BAR0 for 8 VFs)
[ 0.382528] pci 0000:06:00.1: reg 0x190: [mem 0xdf940000-0xdf943fff]
[ 0.382530] pci 0000:06:00.1: VF(n) BAR3 space: [mem 0xdf940000-0xdf95ffff] (contains BAR3 for 8 VFs)
[ 0.382927] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 0.385045] pci 0000:00:1c.0: PCI bridge to [bus 06-07]
[ 0.385050] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
[ 0.385054] pci 0000:00:1c.0: bridge window [mem 0xdf900000-0xdf9fffff]
[ 0.385149] pci 0000:08:00.0: [102b:0522] type 00 class 0x030000
[ 0.385181] pci 0000:08:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.385200] pci 0000:08:00.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
[ 0.385218] pci 0000:08:00.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
[ 0.385674] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.385681] pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf8fffff]
[ 0.385705] pci_bus 0000:09: extended config space not accessible
[ 0.385765] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.385776] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.385779] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.385781] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.385783] pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
[ 0.385786] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.385788] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.385790] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
[ 0.386445] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
[ 0.386451] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.386531] PCI host bridge to bus 0000:7f
[ 0.386534] pci_bus 0000:7f: Unknown NUMA node; performance will be reduced
[ 0.386536] pci_bus 0000:7f: root bus resource [bus 7f]
[ 0.386551] pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
[ 0.386638] pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
[ 0.386736] pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
[ 0.386842] pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
[ 0.386922] pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
[ 0.387026] pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
[ 0.387125] pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
[ 0.387194] pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
[ 0.387262] pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
[ 0.387330] pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
[ 0.387402] pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
[ 0.387475] pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
[ 0.387545] pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
[ 0.387610] pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
[ 0.387677] pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
[ 0.387756] pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
[ 0.387822] pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
[ 0.387889] pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
[ 0.387958] pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
[ 0.388028] pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
[ 0.388096] pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
[ 0.388163] pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
[ 0.388238] pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
[ 0.388316] pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
[ 0.388405] pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
[ 0.388494] pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
[ 0.388586] pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
[ 0.388683] pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
[ 0.388772] pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
[ 0.388855] pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
[ 0.388926] pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
[ 0.389018] pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
[ 0.389111] pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
[ 0.389198] pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
[ 0.389287] pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
[ 0.389374] pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
[ 0.389460] pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
[ 0.389551] pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
[ 0.389633] pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
[ 0.389709] pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
[ 0.389774] pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
[ 0.389839] pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
[ 0.389913] pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
[ 0.389976] pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
[ 0.390230] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 0.390236] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.390319] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.390456] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.390459] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.390618] PCI host bridge to bus 0000:80
[ 0.390621] pci_bus 0000:80: Unknown NUMA node; performance will be reduced
[ 0.390623] pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
[ 0.390626] pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
[ 0.390628] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 0.390658] pci 0000:80:00.0: [8086:3c01] type 01 class 0x060400
[ 0.390762] pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
[ 0.390879] pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
[ 0.391024] pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
[ 0.391161] pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
[ 0.391175] pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
[ 0.391342] pci 0000:80:00.0: PCI bridge to [bus 81]
[ 0.391447] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
[ 0.391452] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.391523] PCI host bridge to bus 0000:ff
[ 0.391525] pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
[ 0.391527] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.391542] pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
[ 0.391629] pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
[ 0.391734] pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
[ 0.391839] pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
[ 0.391919] pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
[ 0.392025] pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
[ 0.392130] pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
[ 0.392199] pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
[ 0.392269] pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
[ 0.392339] pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
[ 0.392413] pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
[ 0.392483] pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
[ 0.392561] pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
[ 0.392631] pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
[ 0.392706] pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
[ 0.392776] pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
[ 0.392846] pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
[ 0.392914] pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
[ 0.392992] pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
[ 0.393064] pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
[ 0.393135] pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
[ 0.393204] pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
[ 0.393281] pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
[ 0.393365] pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
[ 0.393467] pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
[ 0.393564] pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
[ 0.393662] pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
[ 0.393765] pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
[ 0.393866] pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
[ 0.393959] pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
[ 0.394040] pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
[ 0.394139] pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
[ 0.394235] pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
[ 0.394330] pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
[ 0.394435] pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
[ 0.394534] pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
[ 0.394633] pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
[ 0.394732] pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
[ 0.394835] pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
[ 0.394920] pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
[ 0.394991] pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
[ 0.395068] pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
[ 0.395145] pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
[ 0.395218] pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
[ 0.395429] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.395482] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
[ 0.395534] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[ 0.395585] ACPI: PCI: Interrupt link LNKD configured for IRQ 3
[ 0.395635] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.395685] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.395735] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.395785] ACPI: PCI: Interrupt link LNKH configured for IRQ 7
[ 0.398059] iommu: Default domain type: Passthrough
[ 0.398229] SCSI subsystem initialized
[ 0.398271] ACPI: bus type USB registered
[ 0.398299] usbcore: registered new interface driver usbfs
[ 0.398310] usbcore: registered new interface driver hub
[ 0.398336] usbcore: registered new device driver usb
[ 0.398381] pps_core: LinuxPPS API ver. 1 registered
[ 0.398382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.398387] PTP clock support registered
[ 0.398423] EDAC MC: Ver: 3.0.0
[ 0.399097] PCI: Using ACPI for IRQ routing
[ 0.403354] PCI: pci_cache_line_size set to 64 bytes
[ 0.403533] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 0.403552] e820: reserve RAM buffer [mem 0x7da78000-0x7fffffff]
[ 0.403554] e820: reserve RAM buffer [mem 0x7f355000-0x7fffffff]
[ 0.403556] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[ 0.403868] NetLabel: Initializing
[ 0.403870] NetLabel: domain hash size = 128
[ 0.403872] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.403896] NetLabel: unlabeled traffic allowed by default
[ 0.404025] pci 0000:08:00.0: vgaarb: setting as boot VGA device
[ 0.404025] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.404053] pci 0000:08:00.0: vgaarb: bridge control possible
[ 0.404055] vgaarb: loaded
[ 0.405058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.405070] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.407114] clocksource: Switched to clocksource tsc-early
[ 0.432985] VFS: Disk quotas dquot_6.6.0
[ 0.433029] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.433189] pnp: PnP ACPI init
[ 0.433365] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.433370] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.433372] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
[ 0.433375] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 0.433378] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
[ 0.433380] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
[ 0.433390] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.433569] system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
[ 0.433577] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.433785] pnp 00:02: [dma 0 disabled]
[ 0.433850] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.433882] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.434035] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.434052] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434343] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.434346] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.434349] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.434351] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.434362] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.434365] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.434368] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.434370] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.434377] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.434524] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.434531] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.434674] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.434823] system 00:08: [mem 0xfbffe000-0xfbffffff] could not be reserved
[ 0.434831] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435234] pnp: PnP ACPI: found 9 devices
[ 0.441831] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.441899] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.441912] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.441922] pci 0000:00:02.2: PCI bridge to [bus 03]
[ 0.441932] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 0.441943] pci 0000:00:11.0: PCI bridge to [bus 05]
[ 0.441946] pci 0000:00:11.0: bridge window [io 0x8000-0x8fff]
[ 0.441953] pci 0000:00:11.0: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.441958] pci 0000:00:11.0: bridge window [mem 0xdd800000-0xddcfffff 64bit pref]
[ 0.441966] pci 0000:00:1c.0: PCI bridge to [bus 06-07]
[ 0.441969] pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
[ 0.441974] pci 0000:00:1c.0: bridge window [mem 0xdf900000-0xdf9fffff]
[ 0.441983] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.441988] pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf8fffff]
[ 0.441997] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.442013] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.442016] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.442018] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.442020] pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
[ 0.442022] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.442024] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.442026] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
[ 0.442030] pci_bus 0000:05: resource 0 [io 0x8000-0x8fff]
[ 0.442032] pci_bus 0000:05: resource 1 [mem 0xdfa00000-0xdfafffff]
[ 0.442034] pci_bus 0000:05: resource 2 [mem 0xdd800000-0xddcfffff 64bit pref]
[ 0.442036] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff]
[ 0.442038] pci_bus 0000:06: resource 1 [mem 0xdf900000-0xdf9fffff]
[ 0.442041] pci_bus 0000:08: resource 1 [mem 0xde000000-0xdf8fffff]
[ 0.442043] pci_bus 0000:09: resource 4 [io 0x0000-0x03af window]
[ 0.442045] pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.442047] pci_bus 0000:09: resource 6 [io 0x03b0-0x03df window]
[ 0.442049] pci_bus 0000:09: resource 7 [io 0x0d00-0x9fff window]
[ 0.442052] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.442054] pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.442056] pci_bus 0000:09: resource 10 [mem 0x80000000-0xdfffffff window]
[ 0.442117] pci 0000:80:00.0: PCI bridge to [bus 81]
[ 0.442129] pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
[ 0.442132] pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
[ 0.442203] NET: Registered protocol family 2
[ 0.442889] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ 0.446550] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 0.447057] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
[ 0.448093] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 0.448276] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.448960] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, vmalloc)
[ 0.449411] UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ 0.449931] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ 0.450515] NET: Registered protocol family 1
[ 0.450525] NET: Registered protocol family 44
[ 0.450558] pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
[ 0.467129] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x627 took 16165 usecs
[ 0.483117] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x627 took 15590 usecs
[ 0.483165] pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.483285] pci 0000:80:05.0: disabled boot interrupts on device [8086:3c28]
[ 0.483392] PCI: CLS 64 bytes, default 64
[ 0.483495] Unpacking initramfs...
[ 9.853719] Freeing initrd memory: 89176K
[ 9.853909] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 9.853911] software IO TLB: mapped [mem 0x0000000074362000-0x0000000078362000] (64MB)
[ 9.853949] ACPI: bus type thunderbolt registered
[ 9.861125] Initialise system trusted keyrings
[ 9.861144] Key type blacklist registered
[ 9.861268] workingset: timestamp_bits=36 max_order=25 bucket_order=0
[ 9.864891] zbud: loaded
[ 9.865608] pstore: using deflate compression
[ 9.866156] Platform Keyring initialized
[ 9.956451] NET: Registered protocol family 38
[ 9.956458] Key type asymmetric registered
[ 9.956461] Asymmetric key parser 'x509' registered
[ 9.956464] Running certificate verification selftests
[ 10.017369] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[ 10.018490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 10.018571] io scheduler mq-deadline registered
[ 10.018575] io scheduler kyber registered
[ 10.018681] io scheduler bfq registered
[ 10.019131] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 10.019820] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[ 10.019940] pcieport 0000:00:01.0: AER: enabled with IRQ 25
[ 10.020322] pcieport 0000:00:02.0: PME: Signaling with IRQ 27
[ 10.020437] pcieport 0000:00:02.0: AER: enabled with IRQ 27
[ 10.020780] pcieport 0000:00:02.2: PME: Signaling with IRQ 28
[ 10.020890] pcieport 0000:00:02.2: AER: enabled with IRQ 28
[ 10.021263] pcieport 0000:00:03.0: PME: Signaling with IRQ 30
[ 10.021350] pcieport 0000:00:03.0: AER: enabled with IRQ 30
[ 10.021634] pcieport 0000:00:11.0: PME: Signaling with IRQ 31
[ 10.021740] pcieport 0000:00:11.0: AER: enabled with IRQ 31
[ 10.021998] pcieport 0000:00:1c.0: PME: Signaling with IRQ 32
[ 10.022262] pcieport 0000:00:1c.7: PME: Signaling with IRQ 33
[ 10.022550] pcieport 0000:80:00.0: PME: Signaling with IRQ 35
[ 10.022643] pcieport 0000:80:00.0: AER: enabled with IRQ 35
[ 10.022957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.025248] ACPI: AC Adapter [PSD] (on-line)
[ 10.025335] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 10.025368] ACPI: Power Button [PWRB]
[ 10.025433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 10.025501] ACPI: Power Button [PWRF]
[ 10.030715] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 10.030834] pstore: Registered erst as persistent store backend
[ 10.031042] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 10.051814] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 10.052919] Non-volatile memory driver v1.3
[ 10.056534] rdac: device handler registered
[ 10.056693] hp_sw: device handler registered
[ 10.056696] emc: device handler registered
[ 10.056882] alua: device handler registered
[ 10.057096] libphy: Fixed MDIO Bus: probed
[ 10.057512] usbcore: registered new interface driver usbserial_generic
[ 10.057526] usbserial: USB Serial support registered for generic
[ 10.057619] i8042: PNP: No PS/2 controller found.
[ 10.057713] mousedev: PS/2 mouse device common for all mice
[ 10.057813] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 10.057889] rtc_cmos 00:03: RTC can wake from S4
[ 10.057912] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.057931] ehci-pci 0000:00:1d.0: debug port 2
[ 10.058240] rtc_cmos 00:03: registered as rtc0
[ 10.058267] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 10.061890] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb02000
[ 10.062968] intel_pstate: Intel P-state driver initializing
[ 10.065995] hid: raw HID events driver (C) Jiri Kosina
[ 10.066086] usbcore: registered new interface driver usbhid
[ 10.066088] usbhid: USB HID core driver
[ 10.066258] drop_monitor: Initializing network drop monitor service
[ 10.066361] Initializing XFRM netlink socket
[ 10.066595] NET: Registered protocol family 10
[ 10.067441] Segment Routing with IPv6
[ 10.067468] NET: Registered protocol family 17
[ 10.067664] mpls_gso: MPLS GSO support
[ 10.068061] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 10.068135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 10.068139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.068142] usb usb1: Product: EHCI Host Controller
[ 10.068144] usb usb1: Manufacturer: Linux 4.18.0-553.el8_10.x86_64 ehci_hcd
[ 10.068146] usb usb1: SerialNumber: 0000:00:1d.0
[ 10.068540] hub 1-0:1.0: USB hub found
[ 10.068552] hub 1-0:1.0: 2 ports detected
[ 10.068909] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 10.069088] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 10.069103] ehci-pci 0000:00:1a.0: debug port 2
[ 10.073046] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb03000
[ 10.075906] microcode: Microcode Update Driver: v2.2.
[ 10.075941] AVX version of gcm_enc/dec engaged.
[ 10.075943] AES CTR mode by8 optimization enabled
[ 10.080023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 10.080095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 10.080099] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.080102] usb usb2: Product: EHCI Host Controller
[ 10.080103] usb usb2: Manufacturer: Linux 4.18.0-553.el8_10.x86_64 ehci_hcd
[ 10.080105] usb usb2: SerialNumber: 0000:00:1a.0
[ 10.080300] hub 2-0:1.0: USB hub found
[ 10.080309] hub 2-0:1.0: 2 ports detected
[ 10.106559] sched_clock: Marking stable (10106518642, 0)->(10881870026, -775351384)
[ 10.107013] registered taskstats version 1
[ 10.109844] Loading compiled-in X.509 certificates
[ 10.110549] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 2e937e8771e3e4d1052d37705b4758d5a1bfaa2c'
[ 10.111230] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80'
[ 10.111909] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8'
[ 10.112010] zswap: loaded using pool lzo/zbud
[ 10.112472] page_owner is disabled
[ 10.121595] Key type big_key registered
[ 10.125984] Key type encrypted registered
[ 10.126043] ima: No TPM chip found, activating TPM-bypass!
[ 10.126053] ima: Allocated hash algorithm: sha256
[ 10.126079] ima: No architecture policies found
[ 10.126093] evm: Initialising EVM extended attributes:
[ 10.126094] evm: security.selinux
[ 10.126095] evm: security.ima
[ 10.126097] evm: security.capability
[ 10.126098] evm: HMAC attrs: 0x1
[ 10.126555] rtc_cmos 00:03: setting system clock to 2024-06-13 06:13:36 UTC (1718259216)
[ 10.129904] Freeing unused decrypted memory: 2028K
[ 10.131097] Freeing unused kernel image (initmem) memory: 2820K
[ 10.148072] Write protecting the kernel read-only data: 26624k
[ 10.149560] Freeing unused kernel image (text/rodata gap) memory: 2016K
[ 10.150534] Freeing unused kernel image (rodata/data gap) memory: 1672K
[ 10.170371] systemd[1]: systemd 239 (239-82.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 10.182123] systemd[1]: Detected architecture x86-64.
[ 10.182129] systemd[1]: Running in initial RAM disk.
[ 10.200604] systemd[1]: No hostname configured.
[ 10.200615] systemd[1]: Set hostname to <localhost>.
[ 10.200665] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.200676] systemd[1]: Initializing machine ID from random generator.
[ 10.214117] random: ln: uninitialized urandom read (6 bytes read)
[ 10.214305] random: ln: uninitialized urandom read (6 bytes read)
[ 10.258693] systemd[1]: Listening on Open-iSCSI iscsid Socket.
[ 10.258785] systemd[1]: Reached target Swap.
[ 10.258808] systemd[1]: Reached target Timers.
[ 10.258965] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.284911] Loading iSCSI transport class v2.0-870.
[ 10.306074] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 10.323063] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 10.402125] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 10.436718] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 10.436741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.437263] hub 1-1:1.0: USB hub found
[ 10.437353] hub 1-1:1.0: 8 ports detected
[ 10.451494] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 10.451501] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.451852] hub 2-1:1.0: USB hub found
[ 10.451926] hub 2-1:1.0: 6 ports detected
[ 10.712064] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 10.768571] iscsi: registered transport (tcp)
[ 10.800536] iscsi: registered transport (qla4xxx)
[ 10.800604] QLogic iSCSI HBA Driver
[ 10.810757] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[ 10.871386] usb 1-1.1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[ 10.871393] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.871396] usb 1-1.1: Product: Mass Storage Device
[ 10.871398] usb 1-1.1: Manufacturer: JetFlash
[ 10.871400] usb 1-1.1: SerialNumber: XLGKCQ06
[ 10.872117] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[ 10.872149] iscsi: registered transport (cxgb4i)
[ 10.882315] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 10.889224] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[ 10.889246] iscsi: registered transport (bnx2i)
[ 10.907414] iscsi: registered transport (be2iscsi)
[ 10.907418] In beiscsi_module_init, tt=(____ptrval____)
[ 10.912019] tsc: Refined TSC clocksource calibration: 2000.001 MHz
[ 10.912044] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd42f1dc63, max_idle_ns: 440795248933 ns
[ 10.912138] clocksource: Switched to clocksource tsc
[ 10.936026] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 11.024757] usb 1-1.2: New USB device found, idVendor=05dc, idProduct=c75c, bcdDevice= 1.06
[ 11.024765] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.024768] usb 1-1.2: Product: USB Flash Drive
[ 11.024771] usb 1-1.2: Manufacturer: Lexar
[ 11.024773] usb 1-1.2: SerialNumber: DBBBC7CCE68DC5BB1AE9
[ 11.057370] cramfs is deprecated and is slated for removal in a future RHEL release. Please use an alternative file system like squashfs.
[ 11.085038] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 11.089031] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[ 11.142969] No iBFT detected.
[ 11.167625] usb 1-1.5: New USB device found, idVendor=0424, idProduct=2513, bcdDevice= b.b3
[ 11.167633] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.168018] hub 1-1.5:1.0: USB hub found
[ 11.168220] hub 1-1.5:1.0: 3 ports detected
[ 11.254010] raid6: sse2x1 gen() 7129 MB/s
[ 11.271006] raid6: sse2x1 xor() 4441 MB/s
[ 11.288012] raid6: sse2x2 gen() 8288 MB/s
[ 11.305009] raid6: sse2x2 xor() 5240 MB/s
[ 11.322010] raid6: sse2x4 gen() 8696 MB/s
[ 11.339006] raid6: sse2x4 xor() 5080 MB/s
[ 11.339011] raid6: using algorithm sse2x4 gen() 8696 MB/s
[ 11.339012] raid6: .... xor() 5080 MB/s, rmw enabled
[ 11.339014] raid6: using ssse3x2 recovery algorithm
[ 11.340845] async_tx: api initialized (async)
[ 11.343092] xor: automatically using best checksumming function avx
[ 11.452016] usb 1-1.5.2: new low-speed USB device number 6 using ehci-pci
[ 11.520915] device-mapper: uevent: version 1.0.3
[ 11.521174] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[ 11.548081] usb 1-1.5.2: New USB device found, idVendor=c0f4, idProduct=01e0, bcdDevice= 1.10
[ 11.548089] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.548093] usb 1-1.5.2: Product: usb keyboard
[ 11.548095] usb 1-1.5.2: Manufacturer: USB
[ 11.551119] input: USB usb keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/0003:C0F4:01E0.0001/input/input2
[ 11.603460] hid-generic 0003:C0F4:01E0.0001: input,hidraw0: USB HID v1.10 Keyboard [USB usb keyboard] on usb-0000:00:1d.0-1.5.2/input0
[ 11.605973] input: USB usb keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.1/0003:C0F4:01E0.0002/input/input3
[ 11.643950] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 11.657156] input: USB usb keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.1/0003:C0F4:01E0.0002/input/input4
[ 11.657320] hid-generic 0003:C0F4:01E0.0002: input,hidraw1: USB HID v1.10 Device [USB usb keyboard] on usb-0000:00:1d.0-1.5.2/input1
[ 11.733017] usb 1-1.5.3: new low-speed USB device number 7 using ehci-pci
[ 11.800711] RPC: Registered named UNIX socket transport module.
[ 11.800717] RPC: Registered udp transport module.
[ 11.800718] RPC: Registered tcp transport module.
[ 11.800720] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.827085] usb 1-1.5.3: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00
[ 11.827094] usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.827097] usb 1-1.5.3: Product: USB Optical Mouse
[ 11.827100] usb 1-1.5.3: Manufacturer: Logitech
[ 11.829839] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/0003:046D:C05A.0003/input/input5
[ 11.830122] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5.3/input0
[ 11.972364] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 11.972622] scsi host0: usb-storage 1-1.1:1.0
[ 11.972943] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 11.973122] scsi host1: usb-storage 1-1.2:1.0
[ 11.973248] usbcore: registered new interface driver usb-storage
[ 11.976845] usbcore: registered new interface driver uas
[ 12.289860] dca service started, version 1.12.1
[ 12.315561] igb: Intel(R) Gigabit Ethernet Network Driver
[ 12.315567] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 12.323221] libata version 3.00 loaded.
[ 12.333774] ahci 0000:00:1f.2: version 3.0
[ 12.334099] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 12.334107] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 12.338036] scsi host2: ahci
[ 12.338394] scsi host3: ahci
[ 12.338620] scsi host4: ahci
[ 12.338819] scsi host5: ahci
[ 12.338990] scsi host6: ahci
[ 12.339383] scsi host7: ahci
[ 12.339500] ata1: SATA max UDMA/133 abar m2048@0xdfb01000 port 0xdfb01100 irq 45
[ 12.339505] ata2: SATA max UDMA/133 abar m2048@0xdfb01000 port 0xdfb01180 irq 45
[ 12.339508] ata3: DUMMY
[ 12.339509] ata4: DUMMY
[ 12.339511] ata5: DUMMY
[ 12.339512] ata6: DUMMY
[ 12.346982] ACPI: bus type drm_connector registered
[ 12.372903] igb 0000:06:00.0: added PHC on eth0
[ 12.372928] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 12.372930] igb 0000:06:00.0: eth0: (PCIe:5.0Gb/s:Width x4) f8:0f:41:f5:b4:c6
[ 12.373037] igb 0000:06:00.0: eth0: PBA No: 313130-033
[ 12.373040] igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 12.379950] mgag200 0000:08:00.0: vgaarb: deactivate vga console
[ 12.381335] Console: switching to colour dummy device 80x25
[ 12.386386] [drm] Initialized mgag200 1.0.0 20110418 for 0000:08:00.0 on minor 0
[ 12.388326] 8021q: 802.1Q VLAN Support v1.8
[ 12.425638] fbcon: mgag200drmfb (fb0) is primary device
[ 12.429655] igb 0000:06:00.1: added PHC on eth1
[ 12.429789] igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 12.429791] igb 0000:06:00.1: eth1: (PCIe:5.0Gb/s:Width x4) f8:0f:41:f5:b4:c7
[ 12.429929] igb 0000:06:00.1: eth1: PBA No: 313130-033
[ 12.429931] igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 12.432314] igb 0000:06:00.1 eno2: renamed from eth1
[ 12.478335] igb 0000:06:00.0 eno1: renamed from eth0
[ 12.501624] Console: switching to colour frame buffer device 160x64
[ 12.542114] mgag200 0000:08:00.0: [drm] fb0: mgag200drmfb frame buffer device
[ 12.645584] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.645614] ata2: SATA link down (SStatus 0 SControl 300)
[ 12.648292] ata1.00: ATAPI: HL-DT-ST DVDRAM GT80N, SF03, max UDMA/133
[ 12.653057] ata1.00: configured for UDMA/133
[ 12.658235] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N SF03 PQ: 0 ANSI: 5
[ 12.695102] scsi 2:0:0:0: Attached scsi generic sg0 type 5
[ 12.738719] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 12.738725] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.768263] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 13.026420] scsi 0:0:0:0: Direct-Access JetFlash Transcend 64GB 8.07 PQ: 0 ANSI: 2
[ 13.026441] scsi 1:0:0:0: Direct-Access Lexar USB Flash Drive 8.07 PQ: 0 ANSI: 4
[ 13.026831] scsi 0:0:0:0: Attached scsi generic sg1 type 0
[ 13.027298] scsi 1:0:0:0: Attached scsi generic sg2 type 0
[ 13.037701] sd 0:0:0:0: [sda] 125501440 512-byte logical blocks: (64.3 GB/59.8 GiB)
[ 13.037958] sd 1:0:0:0: [sdb] 62517248 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 13.038330] sd 0:0:0:0: [sda] Write Protect is off
[ 13.038333] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 13.039078] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.039081] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.039313] sd 1:0:0:0: [sdb] Write Protect is off
[ 13.039316] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.040433] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 13.042074] random: fast init done
[ 13.045825] sdb: sdb1 sdb2
[ 13.049871] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 13.313075] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.670729] TECH PREVIEW: NVMe/TCP may not be fully supported.
Please review provided documentation for limitations.
[ 13.994638] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 13.999821] ISO 9660 Extensions: RRIP_1991A
[ 14.208162] loop: module loaded
[ 14.210904] loop0: detected capacity change from 0 to 947732480
[ 14.251059] loop1: detected capacity change from 0 to 4294967296
[ 14.281501] loop2: detected capacity change from 0 to 34359738368
[ 14.577821] ISO 9660 Extensions: RRIP_1991A
[ 15.103129] random: crng init done
[ 15.103135] random: 7 urandom warning(s) missed due to ratelimiting
[ 36.147173] ISO 9660 Extensions: RRIP_1991A
[ 62.505666] isci: loading out-of-tree module taints kernel.
[ 62.505798] isci: module verification failed: signature and/or required key missing - tainting kernel
[ 62.505834] isci: Unknown symbol sas_domain_attach_transport (err 0)
[ 62.505865] isci: Unknown symbol sas_slave_configure (err 0)
[ 62.505909] isci: Unknown symbol sas_prep_resume_ha (err 0)
[ 62.505927] isci: Unknown symbol sas_bios_param (err 0)
[ 62.505954] isci: Unknown symbol sas_ata_schedule_reset (err 0)
[ 62.505980] isci: Unknown symbol sas_queuecommand (err 0)
[ 62.505998] isci: Unknown symbol sas_eh_device_reset_handler (err 0)
[ 62.506024] isci: Unknown symbol sas_target_destroy (err 0)
[ 62.506047] isci: Unknown symbol sas_resume_ha (err 0)
[ 62.506061] isci: Unknown symbol sas_eh_abort_handler (err 0)
[ 62.506077] isci: Unknown symbol sas_register_ha (err 0)
[ 62.506098] isci: Unknown symbol sas_unregister_ha (err 0)
[ 62.506126] isci: Unknown symbol sas_ioctl (err 0)
[ 62.506153] isci: Unknown symbol sas_target_alloc (err 0)
[ 62.506175] isci: Unknown symbol try_test_sas_gpio_gp_bit (err 0)
[ 62.506195] isci: Unknown symbol sas_get_local_phy (err 0)
[ 62.506212] isci: Unknown symbol sas_eh_target_reset_handler (err 0)
[ 62.506227] isci: Unknown symbol sas_phy_reset (err 0)
[ 62.506246] isci: Unknown symbol sas_task_abort (err 0)
[ 62.506265] isci: Unknown symbol sas_suspend_ha (err 0)
[ 62.506282] isci: Unknown symbol sas_ssp_task_response (err 0)
[ 62.506297] isci: Unknown symbol sas_drain_work (err 0)
[ 62.506325] isci: Unknown symbol sas_change_queue_depth (err 0)
[ 68.438436] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 76.800159] printk: systemd: 23 output lines suppressed due to ratelimiting
[ 78.253925] SELinux: policy capability network_peer_controls=1
[ 78.253934] SELinux: policy capability open_perms=1
[ 78.253936] SELinux: policy capability extended_socket_class=1
[ 78.253937] SELinux: policy capability always_check_network=0
[ 78.253939] SELinux: policy capability cgroup_seclabel=1
[ 78.253940] SELinux: policy capability nnp_nosuid_transition=1
[ 78.290154] audit: type=1403 audit(1718259284.662:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[ 78.293006] systemd[1]: Successfully loaded SELinux policy in 531.751ms.
[ 78.394265] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 62.136ms.
[ 78.397487] systemd[1]: systemd 239 (239-82.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 78.409141] systemd[1]: Detected architecture x86-64.
[ 79.744668] systemd[1]: initrd-switch-root.service: Succeeded.
[ 79.745146] systemd[1]: Stopped Switch Root.
[ 79.746096] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[ 79.746163] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 79.746251] systemd[1]: Stopped Journal Service.
[ 79.747535] systemd[1]: Starting Journal Service...
[ 79.747807] systemd[1]: plymouth-switch-root.service: Succeeded.
[ 79.748330] systemd[1]: Stopped Plymouth switch root service.
[ 80.554186] IPMI message handler: version 39.2
[ 80.557459] ipmi device interface
[ 80.565607] ipmi_si: IPMI System Interface driver
[ 80.565646] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 80.565651] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 80.565655] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 80.565824] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 80.565868] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 80.566139] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ 80.566147] ipmi_si: Adding ACPI-specified kcs state machine
[ 80.566499] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 80.571768] audit: type=1400 audit(1718259286.943:3): avc: denied { module_load } for pid=2163 comm="systemd-udevd" path="/usr/lib/modules/4.18.0-553.el8_10.x86_64/updates/extra/isci/isci.ko" dev="dm-0" ino=157338 scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=system permissive=1
[ 80.588325] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 80.590208] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 80.590246] isci 0000:05:00.0: driver configured for rev: 5 silicon
[ 80.590262] isci 0000:05:00.0: OEM parameter table found in OROM
[ 80.590265] isci 0000:05:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
[ 80.590581] isci 0000:05:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
[ 80.592972] scsi host8: isci
[ 80.595944] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 80.638381] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 80.638391] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 80.638394] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 80.638397] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 80.674590] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002880, prod_id: 0x0315, dev_id: 0x03)
[ 80.700499] intel_rapl_common: Found RAPL domain package
[ 80.700505] intel_rapl_common: Found RAPL domain core
[ 80.700510] intel_rapl_common: Found RAPL domain dram
[ 80.700824] intel_rapl_common: Found RAPL domain package
[ 80.700831] intel_rapl_common: Found RAPL domain core
[ 80.700837] intel_rapl_common: Found RAPL domain dram
[ 80.713259] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 80.719566] ipmi_ssif: IPMI SSIF Interface driver
[ 81.632182] sas: phy-8:0 added to port-8:0, phy_mask:0x1 (50030058400479c0)
[ 81.632577] sas: DOING DISCOVERY on port 0, pid:8
[ 81.632754] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 81.632784] sas: ata7: end_device-8:0: dev error handler
[ 81.801033] ata7.00: ATA-8: ST9500620NS, FTA6, max UDMA/133
[ 81.801040] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
[ 81.802050] ata7.00: configured for UDMA/133
[ 81.802114] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 81.812941] scsi 8:0:0:0: Direct-Access ATA ST9500620NS FTA6 PQ: 0 ANSI: 5
[ 81.813471] sas: DONE DISCOVERY on port 0, pid:8, result:0
[ 81.813886] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 81.813930] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 81.813951] sd 8:0:0:0: [sdc] Write Protect is off
[ 81.813956] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 81.813988] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 81.848374] sdc: sdc1 sdc2 sdc3
[ 81.849681] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 86.453530] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 86.505282] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 86.505288] 8021q: adding VLAN 0 to HW filter on device eno1
[ 86.519615] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
[ 86.571636] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
[ 86.571641] 8021q: adding VLAN 0 to HW filter on device eno2
[ 90.196446] igb 0000:06:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 90.196653] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 112.985226] sdc: sdc1 sdc2 sdc3
[ 113.878995] device-mapper: thin: Data device (dm-5) discard unsupported: Disabling discard passdown.
[ 117.291571] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 216.655132] usb 1-1.1: USB disconnect, device number 3
[ 225.531047] usb 1-1.1: new high-speed USB device number 8 using ehci-pci
[ 225.773178] usb 1-1.1: New USB device found, idVendor=05dc, idProduct=c75c, bcdDevice= 1.06
[ 225.773186] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 225.773189] usb 1-1.1: Product: USB Flash Drive
[ 225.773192] usb 1-1.1: Manufacturer: Lexar
[ 225.773194] usb 1-1.1: SerialNumber: 10E121C8DF760D78791E
[ 225.773816] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 225.774371] scsi host0: usb-storage 1-1.1:1.0
[ 227.003845] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 8.07 PQ: 0 ANSI: 4
[ 227.004441] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 227.006549] sd 0:0:0:0: [sda] 62517248 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 227.007749] sd 0:0:0:0: [sda] Write Protect is off
[ 227.007756] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 227.008890] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 227.504250] Alternate GPT is invalid, using primary GPT.
[ 227.504265] sda: sda1 sda2 sda3 sda4
[ 227.509178] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 337.975798] Alternate GPT is invalid, using primary GPT.
[ 337.975814] sda: sda1 sda2 sda3 sda4
[ 424.561329] sda:
[ 424.567516] sda:
[ 430.726657] sda:
[ 580.535465] sda: sda1
[ 740.005793] FAT-fs (sda): bogus number of reserved sectors
[ 740.005804] FAT-fs (sda): Can't find a valid FAT filesystem
[ 930.622401] sda: sda1
[ 1016.880041] sda: sda1
[ 1064.271223] FAT-fs (sda): bogus number of reserved sectors
[ 1064.271234] FAT-fs (sda): Can't find a valid FAT filesystem
|
|
|
Thank you for the feedback. I can reproduce the error using Rocky Linux 8.10 minimal install DVD. Please give us some time to investigate the issue. UPDATE: I noticed something looking at your dmesg. After the SELinux error, it appears that the isci module is loaded. When you reach the GUI installer, there aren't any disks still? [ 80.571768] audit: type=1400 audit(1718259286.943:3): avc: denied { module_load } for pid=2163 comm="systemd-udevd" path="/usr/lib/modules/4.18.0-553.el8_10.x86_64/updates/extra/isci/isci.ko" dev="dm-0" ino=157338 scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=system permissive=1 [ 80.588325] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 80.590208] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 80.590246] isci 0000:05:00.0: driver configured for rev: 5 silicon [ 80.590262] isci 0000:05:00.0: OEM parameter table found in OROM [ 80.590265] isci 0000:05:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 80.590581] isci 0000:05:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 80.592972] scsi host8: isci ... [ 81.632182] sas: phy-8:0 added to port-8:0, phy_mask:0x1 (50030058400479c0) [ 81.632577] sas: DOING DISCOVERY on port 0, pid:8 [ 81.632754] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 81.632784] sas: ata7: end_device-8:0: dev error handler [ 81.801033] ata7.00: ATA-8: ST9500620NS, FTA6, max UDMA/133 [ 81.801040] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) [ 81.802050] ata7.00: configured for UDMA/133 [ 81.802114] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 81.812941] scsi 8:0:0:0: Direct-Access ATA ST9500620NS FTA6 PQ: 0 ANSI: 5 [ 81.813471] sas: DONE DISCOVERY on port 0, pid:8, result:0 [ 81.813886] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 81.813930] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 81.813951] sd 8:0:0:0: [sdc] Write Protect is off [ 81.813956] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 81.813988] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.848374] sdc: sdc1 sdc2 sdc3 [ 81.849681] sd 8:0:0:0: [sdc] Attached SCSI disk ... [ 112.985226] sdc: sdc1 sdc2 sdc3 |
|
|
It appears the RHEL installer is having an issue with modprobe. While we are investigating the issue, please try the following workaround: - when the installer reaches the graphical stage, change to a terminal (ex: CTRL+ALT+F2) - manually run "modprobe isci" - return to the installer (ex: CTRL+ALT+F6) Please let us know if this workaround is successful for you. |
|
|
Sorry for the delay in my answer. I've been away the last Friday. I try your workaround, and... It works!!!. The module is loaded in the install process manually and the disk is detected by the OS. I'll get to you when the install is finished. Thank you very much!!!! |
|
|
Thank you for confirming the workaround. It is good news that it works. Please let us know if it survives rebooting after installation. It would be good to know that it is successfully incorporated into the initramfs image without any further end-user actions. |
|
|
I,ve confirmed that the system boot into RHEL normally after workaround proposed. So, yes, it survives the reboot. Thank you very much!! |
|
|
Thanks for confirming the workaround. I am closing this issue for now with a resolution of "no change required". I'll continue to investigate this, and if I find out anything, then I will update this issue. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2024-06-11 07:28 | i4041 | New Issue | |
| 2024-06-11 07:28 | i4041 | Status | new => assigned |
| 2024-06-11 07:28 | i4041 | Assigned To | => pperry |
| 2024-06-11 10:38 | pperry | Note Added: 0009831 | |
| 2024-06-12 02:46 | i4041 | Note Added: 0009835 | |
| 2024-06-12 02:46 | i4041 | File Added: IMG_3314.jpg | |
| 2024-06-12 16:07 | tqhoang | Note Added: 0009839 | |
| 2024-06-13 03:05 | i4041 | Note Added: 0009840 | |
| 2024-06-13 03:05 | i4041 | File Added: rpm.txt | |
| 2024-06-13 03:05 | i4041 | File Added: dmesgoutput.txt | |
| 2024-06-13 03:05 | i4041 | File Added: redhat-release.txt | |
| 2024-06-13 03:05 | i4041 | File Added: unameoutput.txt | |
| 2024-06-13 09:26 | tqhoang | Note Added: 0009842 | |
| 2024-06-13 09:26 | tqhoang | Status | assigned => acknowledged |
| 2024-06-13 09:26 | tqhoang | Assigned To | pperry => tqhoang |
| 2024-06-13 13:06 | tqhoang | Status | acknowledged => feedback |
| 2024-06-13 13:06 | tqhoang | Note Added: 0009845 | |
| 2024-06-13 13:15 | tqhoang | Relationship added | related to 0001461 |
| 2024-06-13 13:16 | tqhoang | Note Edited: 0009845 | |
| 2024-06-14 09:47 | tqhoang | Note Edited: 0009842 | |
| 2024-06-14 09:48 | tqhoang | Note Edited: 0009842 | |
| 2024-06-14 10:18 | tqhoang | Note Edited: 0009842 | |
| 2024-06-17 02:45 | i4041 | Note Added: 0009857 | |
| 2024-06-17 02:45 | i4041 | Status | feedback => assigned |
| 2024-06-17 11:58 | tqhoang | Note Added: 0009860 | |
| 2024-06-17 11:59 | tqhoang | Status | assigned => feedback |
| 2024-06-17 12:11 | i4041 | Note Added: 0009861 | |
| 2024-06-17 12:11 | i4041 | Status | feedback => assigned |
| 2024-06-19 14:11 | tqhoang | Status | assigned => closed |
| 2024-06-19 14:11 | tqhoang | Resolution | open => no change required |
| 2024-06-19 14:11 | tqhoang | Note Added: 0009886 | |
| 2024-07-08 11:52 | toracat | Relationship added | related to 0001468 |
| 2024-07-12 18:45 | toracat | Relationship deleted | related to 0001468 |
