after_resume_from_acpi_1.txt (68,795 bytes)   

[michael@localhost ~]$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17
[    0.000000] Linux version 4.18.5-1.el7.elrepo.x86_64 (mockbuild@Build64R7) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC)) #1 SMP Fri Aug 24 11:35:05 EDT 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.5-1.el7.elrepo.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c90fafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c90fb000-0x00000000c9c7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9c7f000-0x00000000c9e7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c9e7f000-0x00000000c9efefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c9eff000-0x00000000c9efffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9f00000-0x00000000ce7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xaa659018-0xaa669057] usable ==> usable
[    0.000000] e820: update [mem 0xaa659018-0xaa669057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000aa659017] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa659018-0x00000000aa669057] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa669058-0x00000000c90fafff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c90fb000-0x00000000c9c7efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c9c7f000-0x00000000c9e7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000c9e7f000-0x00000000c9efefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000c9eff000-0x00000000c9efffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c9f00000-0x00000000ce7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f7fffff] usable
[    0.000000] efi: EFI v2.40 by HP
[    0.000000] efi:  ACPI=0xc9efe000  ACPI 2.0=0xc9efe014  SMBIOS=0xc98db000  MPS=0xc996c000  ESRT=0xc907c660 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP HP ProDesk 600 G2 DM/8169, BIOS N22 Ver. 02.18 03/27/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x22f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   2 base 00CC000000 mask 7FFC000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] last_pfn = 0xc9f00 max_arch_pfn = 0x400000000
[    0.000000] esrt: ESRT header is not in the memory map.
[    0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02927000, 0x02927fff] PGTABLE
[    0.000000] BRK [0x02928000, 0x02928fff] PGTABLE
[    0.000000] BRK [0x02929000, 0x02929fff] PGTABLE
[    0.000000] BRK [0x0292a000, 0x0292afff] PGTABLE
[    0.000000] BRK [0x0292b000, 0x0292bfff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x3e0bf000-0x3fffdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C9EFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000C9EFD0E8 0000BC (v01 HPQOEM SLIC-BPC 00000000      01000013)
[    0.000000] ACPI: FACP 0x00000000C9EEF000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP   00000001)
[    0.000000] ACPI: DSDT 0x00000000C9ECD000 01E35A (v02 HPQOEM 8169     00000000 INTL 20121018)
[    0.000000] ACPI: FACS 0x00000000C9E6B000 000040
[    0.000000] ACPI: SSDT 0x00000000C9EFC000 000108 (v02 HP     ShmTable 00000001 INTL 20121018)
[    0.000000] ACPI: TCPA 0x00000000C9EFB000 000032 (v02 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000C9EFA000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
[    0.000000] ACPI: UEFI 0x00000000C9E7A000 000042 (v01 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000C9EF4000 0051FA (v02 SaSsdt SaSsdt   00003000 INTL 20121018)
[    0.000000] ACPI: SSDT 0x00000000C9EF3000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20121018)
[    0.000000] ACPI: MSDM 0x00000000C9EF2000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP   00000001)
[    0.000000] ACPI: SLIC 0x00000000C9EF1000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP   00000001)
[    0.000000] ACPI: WSMT 0x00000000C9EF0000 000028 (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: HPET 0x00000000C9EEE000 000038 (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x00000000C9EED000 0000BC (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000C9EEC000 00003C (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000C9ECC000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
[    0.000000] ACPI: SSDT 0x00000000C9ECB000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
[    0.000000] ACPI: SSDT 0x00000000C9ECA000 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20121018)
[    0.000000] ACPI: ASF! 0x00000000C9EC9000 0000A5 (v32 HPQOEM  UYA     00000001 TFSM 000F4240)
[    0.000000] ACPI: FPDT 0x00000000C9EC8000 000044 (v01 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x00000000C9EC7000 000038 (v01 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22f7d4000-0x22f7fdfff]
[    0.000000] crashkernel: memory value expected
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c90fafff]
[    0.000000]   node   0: [mem 0x00000000c9eff000-0x00000000c9efffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022f7fffff]
[    0.000000] Reserved but unavailable: 28519 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f7fffff]
[    0.000000] On node 0 totalpages: 2066585
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12804 pages used for memmap
[    0.000000]   DMA32 zone: 819452 pages, LIFO batch:31
[    0.000000]   Normal zone: 19424 pages used for memmap
[    0.000000]   Normal zone: 1243136 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xcc800000-0xce7fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa659000-0xaa659fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa669000-0xaa669fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc90fb000-0xc9c7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9c7f000-0xc9e7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9e7f000-0xc9efefff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9f00000-0xce7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xce800000-0xf80f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[    0.000000] [mem 0xce800000-0xf80f9fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x9b/0x537 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s147672 r8192 d32552 u524288
[    0.000000] pcpu-alloc: s147672 r8192 d32552 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2034269
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.5-1.el7.elrepo.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
[    0.000000] Memory: 7778172K/8266340K available (12300K kernel code, 2447K rwdata, 3764K rodata, 2316K init, 2452K bss, 488168K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 35830 entries in 140 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.001000] APIC: Switch to symmetric I/O mode setup
[    0.002000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011000] tsc: Detected 2500.000 MHz processor
[    0.011000] tsc: Detected 2496.000 MHz TSC
[    0.011000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
[    0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.00 BogoMIPS (lpj=2496000)
[    0.011000] pid_max: default: 32768 minimum: 301
[    0.011000] Security Framework initialized
[    0.011000] SELinux:  Initializing.
[    0.011000] SELinux:  Starting in permissive mode
[    0.012240] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012693] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012713] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012729] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012906] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.012906] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.012911] mce: CPU supports 10 MCE banks
[    0.012920] CPU0: Thermal monitoring enabled (TM1)
[    0.012938] process: using mwait in idle threads
[    0.012941] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.012941] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.012943] Spectre V2 : Mitigation: Full generic retpoline
[    0.012944] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.012944] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.012945] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.012946] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.013032] Freeing SMP alternatives memory: 32K
[    0.021054] TSC deadline timer enabled
[    0.021058] smpboot: CPU0: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.021139] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.021171] ... version:                4
[    0.021172] ... bit width:              48
[    0.021172] ... generic registers:      8
[    0.021173] ... value mask:             0000ffffffffffff
[    0.021173] ... max period:             00007fffffffffff
[    0.021174] ... fixed-purpose events:   3
[    0.021174] ... event mask:             00000007000000ff
[    0.021210] Hierarchical SRCU implementation.
[    0.021975] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.021989] smp: Bringing up secondary CPUs ...
[    0.022000] x86: Booting SMP configuration:
[    0.022000] .... node  #0, CPUs:      #1 #2 #3
[    0.028266] smp: Brought up 1 node, 4 CPUs
[    0.028266] smpboot: Max logical packages: 1
[    0.028266] smpboot: Total of 4 processors activated (19968.00 BogoMIPS)
[    0.029201] devtmpfs: initialized
[    0.029201] x86/mm: Memory block size: 128MB
[    0.029563] PM: Registering ACPI NVS region [mem 0xc9c7f000-0xc9e7efff] (2097152 bytes)
[    0.029563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.029563] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.030006] pinctrl core: initialized pinctrl subsystem
[    0.030135] NET: Registered protocol family 16
[    0.030218] audit: initializing netlink subsys (disabled)
[    0.030223] audit: type=2000 audit(1537024384.030:1): state=initialized audit_enabled=0 res=1
[    0.030223] cpuidle: using governor menu
[    0.030223] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.030223] ACPI: bus type PCI registered
[    0.030223] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.030223] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.030223] PCI: not using MMCONFIG
[    0.030223] PCI: Using configuration type 1 for base access
[    0.031712] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.031712] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.032001] ACPI: Added _OSI(Module Device)
[    0.032001] ACPI: Added _OSI(Processor Device)
[    0.032001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.032001] ACPI: Added _OSI(Processor Aggregator Device)
[    0.032001] ACPI: Added _OSI(Linux-Dell-Video)
[    0.053305] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.059628] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.061932] ACPI: Dynamic OEM Table Load:
[    0.061946] ACPI: SSDT 0xFFFF8802254AA800 0005BB (v02 PmRef  Cpu0Ist  00003000 INTL 20121018)
[    0.062349] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.063135] ACPI: Dynamic OEM Table Load:
[    0.063141] ACPI: SSDT 0xFFFF880225515400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20121018)
[    0.063478] ACPI: Dynamic OEM Table Load:
[    0.063483] ACPI: SSDT 0xFFFF880225506300 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20121018)
[    0.063734] ACPI: Dynamic OEM Table Load:
[    0.063739] ACPI: SSDT 0xFFFF880225511400 000130 (v02 PmRef  HwpLvt   00003000 INTL 20121018)
[    0.064405] ACPI: Dynamic OEM Table Load:
[    0.064412] ACPI: SSDT 0xFFFF8802254AB000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121018)
[    0.064950] ACPI: Dynamic OEM Table Load:
[    0.064954] ACPI: SSDT 0xFFFF880225511600 000119 (v02 PmRef  ApHwp    00003000 INTL 20121018)
[    0.065269] ACPI: Dynamic OEM Table Load:
[    0.065274] ACPI: SSDT 0xFFFF880225511800 000119 (v02 PmRef  ApCst    00003000 INTL 20121018)
[    0.066657] ACPI: EC: EC started
[    0.066657] ACPI: EC: interrupt blocked
[    0.066672] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.066674] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.066675] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.066676] ACPI: Interpreter enabled
[    0.066706] ACPI: (supports S0 S3 S4 S5)
[    0.066707] ACPI: Using IOAPIC for interrupt routing
[    0.066736] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.067516] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.067523] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.067775] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.068919] ACPI: Power Resource [PG01] (on)
[    0.069258] ACPI: Power Resource [PG02] (on)
[    0.069590] ACPI: Power Resource [PG00] (on)
[    0.074853] ACPI: Power Resource [WRST] (on)
[    0.075190] ACPI: Power Resource [WRST] (on)
[    0.075521] ACPI: Power Resource [WRST] (on)
[    0.075846] ACPI: Power Resource [WRST] (on)
[    0.076177] ACPI: Power Resource [WRST] (on)
[    0.076510] ACPI: Power Resource [WRST] (on)
[    0.076844] ACPI: Power Resource [WRST] (on)
[    0.077173] ACPI: Power Resource [WRST] (on)
[    0.077496] ACPI: Power Resource [WRST] (on)
[    0.077821] ACPI: Power Resource [WRST] (on)
[    0.078147] ACPI: Power Resource [WRST] (on)
[    0.078470] ACPI: Power Resource [WRST] (on)
[    0.078803] ACPI: Power Resource [WRST] (on)
[    0.079135] ACPI: Power Resource [WRST] (on)
[    0.079460] ACPI: Power Resource [WRST] (on)
[    0.079787] ACPI: Power Resource [WRST] (on)
[    0.080113] ACPI: Power Resource [WRST] (on)
[    0.080436] ACPI: Power Resource [WRST] (on)
[    0.080761] ACPI: Power Resource [WRST] (on)
[    0.081088] ACPI: Power Resource [WRST] (on)
[    0.084089] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.084094] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.086720] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[    0.086721] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.088491] PCI host bridge to bus 0000:00
[    0.088494] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.088495] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.088497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.088498] pci_bus 0000:00: root bus resource [mem 0xce800000-0xf7ffffff window]
[    0.088499] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.088501] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.088509] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.089130] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[    0.089141] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[    0.089146] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.089151] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.089165] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.089824] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.089845] pci 0000:00:14.0: reg 0x10: [mem 0xe1020000-0xe102ffff 64bit]
[    0.089907] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.090577] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.090597] pci 0000:00:14.2: reg 0x10: [mem 0xe104b000-0xe104bfff 64bit]
[    0.091253] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.091279] pci 0000:00:16.0: reg 0x10: [mem 0xe104c000-0xe104cfff 64bit]
[    0.091351] pci 0000:00:16.0: PME# supported from D3hot
[    0.091961] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[    0.091976] pci 0000:00:16.3: reg 0x10: [io  0x3080-0x3087]
[    0.091982] pci 0000:00:16.3: reg 0x14: [mem 0xe104a000-0xe104afff]
[    0.092618] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.092634] pci 0000:00:17.0: reg 0x10: [mem 0xe1048000-0xe1049fff]
[    0.092641] pci 0000:00:17.0: reg 0x14: [mem 0xe104f000-0xe104f0ff]
[    0.092648] pci 0000:00:17.0: reg 0x18: [io  0x3088-0x308f]
[    0.092655] pci 0000:00:17.0: reg 0x1c: [io  0x3090-0x3093]
[    0.092662] pci 0000:00:17.0: reg 0x20: [io  0x3040-0x305f]
[    0.092669] pci 0000:00:17.0: reg 0x24: [mem 0xe104d000-0xe104d7ff]
[    0.092706] pci 0000:00:17.0: PME# supported from D3hot
[    0.093331] pci 0000:00:1f.0: [8086:a147] type 00 class 0x060100
[    0.093999] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.094013] pci 0000:00:1f.2: reg 0x10: [mem 0xe1040000-0xe1043fff]
[    0.094653] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.094678] pci 0000:00:1f.3: reg 0x10: [mem 0xe1044000-0xe1047fff 64bit]
[    0.094702] pci 0000:00:1f.3: reg 0x20: [mem 0xe1030000-0xe103ffff 64bit]
[    0.094746] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.095381] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.095436] pci 0000:00:1f.4: reg 0x10: [mem 0xe104e000-0xe104e0ff 64bit]
[    0.095486] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.096154] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[    0.096181] pci 0000:00:1f.6: reg 0x10: [mem 0xe1000000-0xe101ffff]
[    0.096291] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.097893] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.097966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.098039] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098110] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098180] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098319] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.098615] ACPI: EC: interrupt unblocked
[    0.098631] ACPI: EC: event unblocked
[    0.098639] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.098641] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.098694] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.098694] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.098694] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.098694] vgaarb: loaded
[    0.098694] SCSI subsystem initialized
[    0.098694] ACPI: bus type USB registered
[    0.098694] usbcore: registered new interface driver usbfs
[    0.098694] usbcore: registered new interface driver hub
[    0.098694] usbcore: registered new device driver usb
[    0.098694] EDAC MC: Ver: 3.0.0
[    0.098694] Registered efivars operations
[    0.126367] PCI: Using ACPI for IRQ routing
[    0.133536] PCI: pci_cache_line_size set to 64 bytes
[    0.133568] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.133569] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.133570] e820: reserve RAM buffer [mem 0xaa659018-0xabffffff]
[    0.133571] e820: reserve RAM buffer [mem 0xc90fb000-0xcbffffff]
[    0.133572] e820: reserve RAM buffer [mem 0xc9f00000-0xcbffffff]
[    0.133573] e820: reserve RAM buffer [mem 0x22f800000-0x22fffffff]
[    0.133650] NetLabel: Initializing
[    0.133650] NetLabel:  domain hash size = 128
[    0.133651] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.133663] NetLabel:  unlabeled traffic allowed by default
[    0.133666] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.133666] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.135012] clocksource: Switched to clocksource tsc-early
[    0.143959] VFS: Disk quotas dquot_6.6.0
[    0.143970] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.144028] pnp: PnP ACPI init
[    0.144152] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.144154] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.144155] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.144157] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.144159] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.144163] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144381] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.144385] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144495] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.144497] system 00:02: [io  0xffff] has been reserved
[    0.144499] system 00:02: [io  0xffff] has been reserved
[    0.144500] system 00:02: [io  0xffff] has been reserved
[    0.144501] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.144503] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.144506] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144570] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.144573] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.144589] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.144617] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.144620] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.144765] system 00:06: [io  0x0200-0x023f] has been reserved
[    0.144767] system 00:06: [mem 0xfedb0000-0xfedbffff] has been reserved
[    0.144770] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145038] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.145040] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.145041] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.145043] system 00:07: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.145045] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.145046] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.145048] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.145049] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.145051] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.145052] system 00:07: [mem 0xce800000-0xce81ffff] has been reserved
[    0.145055] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145286] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.145329] pnp: PnP ACPI: found 9 devices
[    0.150922] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.150927] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.150929] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.150930] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.150932] pci_bus 0000:00: resource 7 [mem 0xce800000-0xf7ffffff window]
[    0.150933] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.151041] NET: Registered protocol family 2
[    0.151171] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.151195] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.151292] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.151380] TCP: Hash tables configured (established 65536 bind 65536)
[    0.151406] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.151425] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.151466] NET: Registered protocol family 1
[    0.151476] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.151730] PCI: CLS 0 bytes, default 64
[    0.151759] Unpacking initramfs...
[    0.611935] Freeing initrd memory: 31996K
[    0.611953] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.611956] software IO TLB [mem 0xb677e000-0xba77e000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.612096] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
[    0.612106] clocksource: Switched to clocksource tsc
[    0.612400] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes, mapped to 0x(____ptrval____)
[    0.612402] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
[    0.613927] Console: switching to colour frame buffer device 128x48
[    0.615391] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.616040] Initialise system trusted keyrings
[    0.616069] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.617158] zbud: loaded
[    0.617445] pstore: using deflate compression
[    0.617483] SELinux:  Registering netfilter hooks
[    0.893597] NET: Registered protocol family 38
[    0.893598] Key type asymmetric registered
[    0.893599] Asymmetric key parser 'x509' registered
[    0.893630] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.893653] io scheduler noop registered
[    0.893654] io scheduler deadline registered (default)
[    0.893686] io scheduler cfq registered
[    0.893786] intel_idle: MWAIT substates: 0x142120
[    0.893787] intel_idle: v0.4.1 model 0x5E
[    0.893935] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.894039] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.894046] ACPI: Sleep Button [SLPB]
[    0.894074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.894078] ACPI: Power Button [PWRB]
[    0.894104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.894115] ACPI: Power Button [PWRF]
[    0.894977] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.895276] serial 0000:00:16.3: enabling device (0000 -> 0003)
[    0.915722] 0000:00:16.3: ttyS0 at I/O 0x3080 (irq = 19, base_baud = 115200) is a 16550A
[    0.915975] Non-volatile memory driver v1.3
[    0.915992] Linux agpgart interface v0.103
[    0.918094] tpm_tis 00:08: 1.2 TPM (device-id 0x1B, rev-id 16)
[    0.929920] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[    0.929947] tpm tpm0: TPM is disabled/deactivated (0x7)
[    0.929949] tpm tpm0: tpm_read_log_acpi: TCPA log area empty
[    0.929970] tpm_tis: probe of 00:08 failed with error -5
[    0.930693] rdac: device handler registered
[    0.930881] hp_sw: device handler registered
[    0.930882] emc: device handler registered
[    0.931011] alua: device handler registered
[    0.931617] libphy: Fixed MDIO Bus: probed
[    0.931712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.931715] ehci-pci: EHCI PCI platform driver
[    0.931724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.931725] ohci-pci: OHCI PCI platform driver
[    0.931731] uhci_hcd: USB Universal Host Controller Interface driver
[    0.931883] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.931971] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.933070] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[    0.933074] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.933258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.933259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.933261] usb usb1: Product: xHCI Host Controller
[    0.933262] usb usb1: Manufacturer: Linux 4.18.5-1.el7.elrepo.x86_64 xhci-hcd
[    0.933263] usb usb1: SerialNumber: 0000:00:14.0
[    0.933374] hub 1-0:1.0: USB hub found
[    0.933400] hub 1-0:1.0: 16 ports detected
[    0.933833] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.933889] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.933892] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.933932] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.933934] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.933935] usb usb2: Product: xHCI Host Controller
[    0.933936] usb usb2: Manufacturer: Linux 4.18.5-1.el7.elrepo.x86_64 xhci-hcd
[    0.933938] usb usb2: SerialNumber: 0000:00:14.0
[    0.934014] hub 2-0:1.0: USB hub found
[    0.934035] hub 2-0:1.0: 8 ports detected
[    0.934206] usb: port power management may be unreliable
[    0.934532] usbcore: registered new interface driver usbserial_generic
[    0.934536] usbserial: USB Serial support registered for generic
[    0.934541] usbcore: registered new interface driver wishbone_serial
[    0.934544] usbserial: USB Serial support registered for wishbone_serial
[    0.934561] i8042: PNP: No PS/2 controller found.
[    0.934651] mousedev: PS/2 mouse device common for all mice
[    0.934897] rtc_cmos 00:04: RTC can wake from S4
[    0.935380] rtc_cmos 00:04: registered as rtc0
[    0.935391] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.935399] intel_pstate: Intel P-state driver initializing
[    0.935654] intel_pstate: HWP enabled
[    0.935736] ledtrig-cpu: registered to indicate activity on CPUs
[    0.935886] EFI Variables Facility v0.08 2004-May-17
[    0.973053] hidraw: raw HID events driver (C) Jiri Kosina
[    0.973110] usbcore: registered new interface driver usbhid
[    0.973111] usbhid: USB HID core driver
[    0.973148] drop_monitor: Initializing network drop monitor service
[    0.973196] Initializing XFRM netlink socket
[    0.973274] NET: Registered protocol family 10
[    0.973418] Segment Routing with IPv6
[    0.973430] NET: Registered protocol family 17
[    0.973439] Bridge firewalling registered
[    0.973627] microcode: sig=0x506e3, pf=0x2, revision=0xc6
[    0.973650] microcode: Microcode Update Driver: v2.2.
[    0.973657] sched_clock: Marking stable (973647350, 0)->(969402404, 4244946)
[    0.973772] registered taskstats version 1
[    0.973773] Loading compiled-in X.509 certificates
[    0.973784] zswap: loaded using pool lzo/zbud
[    0.975487] Key type big_key registered
[    0.976878] Key type trusted registered
[    0.978252] Key type encrypted registered
[    0.978257] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.978260] ima: Allocated hash algorithm: sha1
[    0.978276] evm: Initialising EVM extended attributes:
[    0.978277] evm: security.selinux
[    0.978277] evm: security.ima
[    0.978278] evm: security.capability
[    0.978278] evm: HMAC attrs: 0x1
[    0.978874] rtc_cmos 00:04: setting system clock to 2018-09-15 15:13:05 UTC (1537024385)
[    0.980350] Freeing unused kernel image memory: 2316K
[    0.989087] Write protecting the kernel read-only data: 18432k
[    0.989945] Freeing unused kernel image memory: 2012K
[    0.990163] Freeing unused kernel image memory: 332K
[    1.062194] random: systemd: uninitialized urandom read (16 bytes read)
[    1.062402] random: systemd: uninitialized urandom read (16 bytes read)
[    1.062412] random: systemd: uninitialized urandom read (16 bytes read)
[    1.067013] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.079423] systemd[1]: Detected architecture x86-64.
[    1.079425] systemd[1]: Running in initial RAM disk.
[    1.079455] systemd[1]: Set hostname to <localhost.localdomain>.
[    1.103562] systemd[1]: Reached target Local File Systems.
[    1.103569] systemd[1]: Starting Local File Systems.
[    1.103799] systemd[1]: Created slice Root Slice.
[    1.103804] systemd[1]: Starting Root Slice.
[    1.103824] systemd[1]: Listening on udev Kernel Socket.
[    1.103828] systemd[1]: Starting udev Kernel Socket.
[    1.198578] device-mapper: uevent: version 1.0.3
[    1.198630] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.247217] pps_core: LinuxPPS API ver. 1 registered
[    1.247218] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.248452] PTP clock support registered
[    1.249420] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.249421] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.250619] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.251098] libata version 3.00 loaded.
[    1.252487] ahci 0000:00:17.0: version 3.0
[    1.252868] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    1.260371] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.260372] fb: switching to inteldrmfb from simple
[    1.260393] Console: switching to colour dummy device 80x25
[    1.260447] [drm] Replacing VGA console driver
[    1.261309] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.263257] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.263259] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst 
[    1.279535] scsi host0: ahci
[    1.279614] scsi host1: ahci
[    1.279707] scsi host2: ahci
[    1.281045] scsi host3: ahci
[    1.285068] scsi host4: ahci
[    1.286275] scsi host5: ahci
[    1.286319] ata1: SATA max UDMA/133 abar m2048@0xe104d000 port 0xe104d100 irq 122
[    1.286320] ata2: SATA max UDMA/133 abar m2048@0xe104d000 port 0xe104d180 irq 122
[    1.286322] ata3: SATA max UDMA/133 abar m2048@0xe104d000 port 0xe104d200 irq 122
[    1.286323] ata4: SATA max UDMA/133 abar m2048@0xe104d000 port 0xe104d280 irq 122
[    1.286324] ata5: SATA max UDMA/133 abar m2048@0xe104d000 port 0xe104d300 irq 122
[    1.286326] ata6: SATA max UDMA/133 abar m2048@0xe104d000 port 0xe104d380 irq 122
[    1.311110] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.311111] [drm] Driver supports precise vblank timestamp query.
[    1.311185] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.312439] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    1.315016] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    1.316078] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.316523] acpi device:07: registered as cooling_device4
[    1.316581] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.340045] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.389651] usb 1-2: New USB device found, idVendor=2040, idProduct=0264, bcdDevice= 1.00
[    1.389653] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.389654] usb 1-2: Product: soloHD
[    1.389655] usb 1-2: Manufacturer: HCW
[    1.389656] usb 1-2: SerialNumber: 0011560403
[    1.422196] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 40:b0:34:f4:74:89
[    1.422198] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.422264] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    1.422796] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    1.505038] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.517740] usb 2-1: New USB device found, idVendor=1058, idProduct=25a1, bcdDevice=10.05
[    1.517741] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.517742] usb 2-1: Product: Elements 25A1
[    1.517743] usb 2-1: Manufacturer: Western Digital
[    1.517744] usb 2-1: SerialNumber: 57583531413136435A523258
[    1.519938] usb-storage 2-1:1.0: USB Mass Storage device detected
[    1.519999] scsi host6: usb-storage 2-1:1.0
[    1.520054] usbcore: registered new interface driver usb-storage
[    1.520237] usbcore: registered new interface driver uas
[    1.596125] random: fast init done
[    1.597497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.598811] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[    1.598813] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.598999] ata1.00: ATA-9: HGST HTS725050A7E630, GS2OA3C0, max UDMA/133
[    1.599000] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.600521] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[    1.600523] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.600806] ata1.00: configured for UDMA/133
[    1.601104] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 A3C0 PQ: 0 ANSI: 5
[    1.606361] fbcon: inteldrmfb (fb0) is primary device
[    1.628440] Console: switching to colour frame buffer device 160x64
[    1.632110] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    1.647135] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.759573] usb 1-4: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
[    1.759577] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.760647] hub 1-4:1.0: USB hub found
[    1.760687] hub 1-4:1.0: 4 ports detected
[    1.909261] ata2: SATA link down (SStatus 4 SControl 300)
[    2.044275] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd
[    2.136031] usb 1-4.4: New USB device found, idVendor=24ae, idProduct=2000, bcdDevice=10.01
[    2.136036] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.136040] usb 1-4.4: Product: RAPOO 2.4G Wireless Device
[    2.136043] usb 1-4.4: Manufacturer: RAPOO
[    2.143477] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:24AE:2000.0001/input/input4
[    2.195656] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-4.4/input0
[    2.198963] input: RAPOO RAPOO 2.4G Wireless Device Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:24AE:2000.0002/input/input5
[    2.199347] input: RAPOO RAPOO 2.4G Wireless Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:24AE:2000.0002/input/input6
[    2.217343] ata3: SATA link down (SStatus 4 SControl 300)
[    2.251454] input: RAPOO RAPOO 2.4G Wireless Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:24AE:2000.0002/input/input7
[    2.251848] hid-generic 0003:24AE:2000.0002: input,hiddev96,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-4.4/input1
[    2.525273] ata4: SATA link down (SStatus 4 SControl 300)
[    2.529120] scsi 6:0:0:0: Direct-Access     WD       Elements 25A1    1005 PQ: 0 ANSI: 6
[    2.536692] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.536697] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.536715] sd 0:0:0:0: [sda] Write Protect is off
[    2.536719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.536746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.537264] sd 6:0:0:0: [sdb] 2930210816 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.537551] sd 6:0:0:0: [sdb] Write Protect is off
[    2.537555] sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08
[    2.537839] sd 6:0:0:0: [sdb] No Caching mode page found
[    2.537902] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    2.542351]  sdb: sdb1
[    2.543439] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.607839]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    2.609032] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.829320] ata5: SATA link down (SStatus 4 SControl 300)
[    3.133394] ata6: SATA link down (SStatus 4 SControl 300)
[    3.613300] random: crng init done
[    3.613301] random: 7 urandom warning(s) missed due to ratelimiting
[    3.903639] SGI XFS with ACLs, security attributes, no debug enabled
[    3.904620] XFS (dm-0): Mounting V5 Filesystem
[    4.075803] XFS (dm-0): Ending clean mount
[    4.561402] systemd-journald[150]: Received SIGTERM from PID 1 (systemd).
[    4.688372] systemd: 24 output lines suppressed due to ratelimiting
[    5.068144] audit: type=1404 audit(1537024389.588:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[    5.160786] SELinux: 32768 avtab hash slots, 106487 rules.
[    5.174114] SELinux: 32768 avtab hash slots, 106487 rules.
[    5.195380] SELinux:  8 users, 14 roles, 5009 types, 310 bools, 1 sens, 1024 cats
[    5.195382] SELinux:  97 classes, 106487 rules
[    5.198573] SELinux:  Permission getrlimit in class process not defined in policy.
[    5.198583] SELinux:  Permission map in class file not defined in policy.
[    5.198587] SELinux:  Permission map in class dir not defined in policy.
[    5.198591] SELinux:  Permission map in class lnk_file not defined in policy.
[    5.198593] SELinux:  Permission map in class chr_file not defined in policy.
[    5.198595] SELinux:  Permission map in class blk_file not defined in policy.
[    5.198598] SELinux:  Permission map in class sock_file not defined in policy.
[    5.198600] SELinux:  Permission map in class fifo_file not defined in policy.
[    5.198603] SELinux:  Permission map in class socket not defined in policy.
[    5.198605] SELinux:  Permission map in class tcp_socket not defined in policy.
[    5.198608] SELinux:  Permission map in class udp_socket not defined in policy.
[    5.198611] SELinux:  Permission map in class rawip_socket not defined in policy.
[    5.198614] SELinux:  Permission map in class netlink_socket not defined in policy.
[    5.198617] SELinux:  Permission map in class packet_socket not defined in policy.
[    5.198619] SELinux:  Permission map in class key_socket not defined in policy.
[    5.198621] SELinux:  Permission map in class unix_stream_socket not defined in policy.
[    5.198624] SELinux:  Permission map in class unix_dgram_socket not defined in policy.
[    5.198631] SELinux:  Permission map in class netlink_route_socket not defined in policy.
[    5.198634] SELinux:  Permission map in class netlink_tcpdiag_socket not defined in policy.
[    5.198636] SELinux:  Permission map in class netlink_nflog_socket not defined in policy.
[    5.198638] SELinux:  Permission map in class netlink_xfrm_socket not defined in policy.
[    5.198641] SELinux:  Permission map in class netlink_selinux_socket not defined in policy.
[    5.198643] SELinux:  Permission map in class netlink_iscsi_socket not defined in policy.
[    5.198645] SELinux:  Permission map in class netlink_audit_socket not defined in policy.
[    5.198648] SELinux:  Permission map in class netlink_fib_lookup_socket not defined in policy.
[    5.198651] SELinux:  Permission map in class netlink_connector_socket not defined in policy.
[    5.198653] SELinux:  Permission map in class netlink_netfilter_socket not defined in policy.
[    5.198656] SELinux:  Permission map in class netlink_dnrt_socket not defined in policy.
[    5.198659] SELinux:  Permission map in class netlink_kobject_uevent_socket not defined in policy.
[    5.198661] SELinux:  Permission map in class netlink_generic_socket not defined in policy.
[    5.198663] SELinux:  Permission map in class netlink_scsitransport_socket not defined in policy.
[    5.198665] SELinux:  Permission map in class netlink_rdma_socket not defined in policy.
[    5.198668] SELinux:  Permission map in class netlink_crypto_socket not defined in policy.
[    5.198670] SELinux:  Permission map in class appletalk_socket not defined in policy.
[    5.198674] SELinux:  Permission map in class dccp_socket not defined in policy.
[    5.198678] SELinux:  Permission map in class tun_socket not defined in policy.
[    5.198685] SELinux:  Class sctp_socket not defined in policy.
[    5.198685] SELinux:  Class icmp_socket not defined in policy.
[    5.198686] SELinux:  Class ax25_socket not defined in policy.
[    5.198686] SELinux:  Class ipx_socket not defined in policy.
[    5.198687] SELinux:  Class netrom_socket not defined in policy.
[    5.198687] SELinux:  Class atmpvc_socket not defined in policy.
[    5.198688] SELinux:  Class x25_socket not defined in policy.
[    5.198688] SELinux:  Class rose_socket not defined in policy.
[    5.198689] SELinux:  Class decnet_socket not defined in policy.
[    5.198689] SELinux:  Class atmsvc_socket not defined in policy.
[    5.198690] SELinux:  Class rds_socket not defined in policy.
[    5.198690] SELinux:  Class irda_socket not defined in policy.
[    5.198690] SELinux:  Class pppox_socket not defined in policy.
[    5.198691] SELinux:  Class llc_socket not defined in policy.
[    5.198691] SELinux:  Class can_socket not defined in policy.
[    5.198692] SELinux:  Class tipc_socket not defined in policy.
[    5.198692] SELinux:  Class bluetooth_socket not defined in policy.
[    5.198693] SELinux:  Class iucv_socket not defined in policy.
[    5.198693] SELinux:  Class rxrpc_socket not defined in policy.
[    5.198694] SELinux:  Class isdn_socket not defined in policy.
[    5.198694] SELinux:  Class phonet_socket not defined in policy.
[    5.198695] SELinux:  Class ieee802154_socket not defined in policy.
[    5.198695] SELinux:  Class caif_socket not defined in policy.
[    5.198696] SELinux:  Class alg_socket not defined in policy.
[    5.198696] SELinux:  Class nfc_socket not defined in policy.
[    5.198696] SELinux:  Class vsock_socket not defined in policy.
[    5.198697] SELinux:  Class kcm_socket not defined in policy.
[    5.198697] SELinux:  Class qipcrtr_socket not defined in policy.
[    5.198698] SELinux:  Class smc_socket not defined in policy.
[    5.198699] SELinux:  Class bpf not defined in policy.
[    5.198700] SELinux:  Class xdp_socket not defined in policy.
[    5.198700] SELinux: the above unknown classes and permissions will be allowed
[    5.198703] SELinux:  policy capability network_peer_controls=1
[    5.198703] SELinux:  policy capability open_perms=1
[    5.198704] SELinux:  policy capability extended_socket_class=0
[    5.198704] SELinux:  policy capability always_check_network=0
[    5.198705] SELinux:  policy capability cgroup_seclabel=1
[    5.198705] SELinux:  policy capability nnp_nosuid_transition=1
[    5.198706] SELinux:  Completing initialization.
[    5.198706] SELinux:  Setting up existing superblocks.
[    5.212351] audit: type=1403 audit(1537024389.732:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
[    5.214465] systemd[1]: Successfully loaded SELinux policy in 168.955ms.
[    5.374286] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    5.633379] systemd[1]: Inserted module 'ip_tables'
[    5.673171] systemd[1]: Relabelled /dev and /run in 36.789ms.
[    8.003055] systemd-journald[563]: Received request to flush runtime journal from PID 1
[   11.441860] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[   11.441989] acpi PNP0C14:02: duplicate WMI GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 (first instance was on PNP0C14:00)
[   11.441992] acpi PNP0C14:02: duplicate WMI GUID 41227C2D-80E1-423F-8B8E-87E32755A0EB (first instance was on PNP0C14:00)
[   11.441996] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[   11.459136] i801_smbus 0000:00:1f.4: enabling device (0100 -> 0103)
[   11.459498] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   11.512133] tpm_inf_pnp 00:08: Found TPM with ID IFX0102
[   11.531554] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   11.673182] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.673213] sd 6:0:0:0: Attached scsi generic sg1 type 0
[   11.676425] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   12.030501] iTCO_vendor_support: vendor-support=0
[   12.037574] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.037656] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   12.037948] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.097421] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   12.097424] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   12.097426] RAPL PMU: hw unit of domain package 2^-14 Joules
[   12.097428] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   12.097429] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   12.097431] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   12.131478] videodev: Linux video capture interface: v2.00
[   12.298307] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000a2a1d310 (20180531/exresop-560)
[   12.298322] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20180531/dswexec-427)
[   12.298333] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20180531/psparse-516)
[   12.298350] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20180531/psparse-516)
[   12.300043] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000e5c5afbb (20180531/exresop-560)
[   12.300055] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20180531/dswexec-427)
[   12.300064] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20180531/psparse-516)
[   12.300079] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20180531/psparse-516)
[   12.301823] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000c2130da1 (20180531/exresop-560)
[   12.301838] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20180531/dswexec-427)
[   12.301849] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20180531/psparse-516)
[   12.301866] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20180531/psparse-516)
[   12.301981] input: HP WMI hotkeys as /devices/virtual/input/input12
[   12.308217] hp_wmi: query 0x5 returned error 0x3
[   12.308603] ACPI Error: Attempt to CreateField of length zero (20180531/dsopcode-134)
[   12.308618] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20180531/psparse-516)
[   12.308639] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20180531/psparse-516)
[   12.339042] em28xx 1-2:1.0: New device HCW soloHD @ 480 Mbps (2040:0264, interface 0, class 0)
[   12.339047] em28xx 1-2:1.0: DVB interface 0 found: isoc
[   12.342248] cryptd: max_cpu_qlen set to 1000
[   12.391513] em28xx 1-2:1.0: chip ID is em28178
[   12.435709] AVX2 version of gcm_enc/dec engaged.
[   12.435712] AES CTR mode by8 optimization enabled
[   12.488642] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[   12.497340] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
[   12.497840] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.598472] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC221: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   12.598478] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.598482] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   12.598485] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.598487] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.598491] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[   12.763491] kvm: disabled by bios
[   12.785260] kvm: disabled by bios
[   12.799385] kvm: disabled by bios
[   12.816323] kvm: disabled by bios
[   12.846704] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   12.846905] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   12.847085] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   12.847236] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   12.847382] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   12.847524] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[   12.847637] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[   12.956822] intel_pmc_core:  initialized
[   14.354226] em28xx 1-2:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x81eac504
[   14.354230] em28xx 1-2:1.0: EEPROM info:
[   14.354234] em28xx 1-2:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
[   14.361336] em28xx 1-2:1.0: 	AC97 audio (5 sample rates)
[   14.361340] em28xx 1-2:1.0: 	500mA max power
[   14.361345] em28xx 1-2:1.0: 	Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[   14.413080] em28xx 1-2:1.0: Identified as PCTV tripleStick (292e) (card=94)
[   14.413087] em28xx 1-2:1.0: dvb set to isoc mode.
[   14.413195] usbcore: registered new interface driver em28xx
[   14.454633] em28xx 1-2:1.0: Binding DVB extension
[   14.458315] i2c i2c-7: Added multiplexed i2c bus 8
[   14.458317] si2168 7-0064: Silicon Labs Si2168-B40 successfully identified
[   14.458318] si2168 7-0064: firmware version: B 4.0.2
[   14.459865] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[   14.459876] dvbdev: DVB: registering new adapter (1-2:1.0)
[   14.459877] em28xx 1-2:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   14.461576] em28xx 1-2:1.0: DVB extension successfully initialized
[   14.461578] em28xx: Registered (Em28xx dvb Extension) extension
[   14.463523] em28xx 1-2:1.0: Registering input extension
[   14.486058] Registered IR keymap rc-pinnacle-pctv-hd
[   14.486378] rc rc0: 1-2:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/rc/rc0
[   14.486454] input: 1-2:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/rc/rc0/input20
[   14.486627] em28xx 1-2:1.0: Input extension successfully initialized
[   14.486630] em28xx: Registered (Em28xx Input Extension) extension
[   14.572968] Adding 8126460k swap on /dev/mapper/centos-swap.  Priority:-2 extents:1 across:8126460k FS
[   14.904324] XFS (sda5): Mounting V5 Filesystem
[   15.458269] XFS (sda5): Ending clean mount
[   15.594829] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   17.331152] XFS (dm-2): Mounting V5 Filesystem
[   17.988767] XFS (dm-2): Ending clean mount
[   18.522928] RPC: Registered named UNIX socket transport module.
[   18.522929] RPC: Registered udp transport module.
[   18.522930] RPC: Registered tcp transport module.
[   18.522930] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.980671] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   25.184412] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   26.687709] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   26.687716] e1000e 0000:00:1f.6 eno1: 10/100 speed: disabling TSO
[   26.687785] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   30.534739] tun: Universal TUN/TAP device driver, 1.6
[   30.541904] virbr0: port 1(virbr0-nic) entered blocking state
[   30.541908] virbr0: port 1(virbr0-nic) entered disabled state
[   30.542048] device virbr0-nic entered promiscuous mode
[   30.675709] virbr0: port 1(virbr0-nic) entered blocking state
[   30.675712] virbr0: port 1(virbr0-nic) entered listening state
[   30.804364] virbr0: port 1(virbr0-nic) entered disabled state
[   63.270106] fuse init (API version 7.27)
[   67.195907] rfkill: input handler disabled
[   86.129117] si2168 7-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[   86.383407] si2168 7-0064: firmware version: B 4.0.11
[   86.388433] si2157 8-0060: found a 'Silicon Labs Si2157-A30'
[   86.437585] si2157 8-0060: firmware version: 3.0.5
[10938.817317] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[28766.217137] perf: interrupt took too long (3222 > 3130), lowering kernel.perf_event_max_sample_rate to 62000
[45108.617361] PM: suspend entry (deep)
[45108.617365] PM: Syncing filesystems ... done.
[45108.764011] Freezing user space processes ... (elapsed 0.003 seconds) done.
[45108.767333] OOM killer disabled.
[45108.767335] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[45108.768495] Suspending console(s) (use no_console_suspend to debug)
[45108.770389] em28xx 1-2:1.0: Suspending extensions
[45108.770394] em28xx 1-2:1.0: Suspending DVB extension
[45108.771020] e1000e: EEE TX LPI TIMER: 00000011
[45108.777335] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[45108.777493] sd 0:0:0:0: [sda] Stopping disk
[45108.842170] em28xx 1-2:1.0: fe0 suspend -110
[45108.842171] em28xx 1-2:1.0: Suspending input extension
[45109.294307] ACPI: EC: interrupt blocked
[45109.307684] ACPI: Preparing to enter system sleep state S3
[45109.308524] ACPI: EC: event blocked
[45109.308525] ACPI: EC: EC stopped
[45109.308526] PM: Saving platform NVS memory
[45109.308537] Disabling non-boot CPUs ...
[45109.315996] smpboot: CPU 1 is now offline
[45109.330783] IRQ 122: no longer affine to CPU2
[45109.331809] smpboot: CPU 2 is now offline
[45109.342768] IRQ 123: no longer affine to CPU3
[45109.343794] smpboot: CPU 3 is now offline
[45109.346966] ACPI: Low-level resume complete
[45109.347042] ACPI: EC: EC started
[45109.347043] PM: Restoring platform NVS memory
[45109.349295] Enabling non-boot CPUs ...
[45109.349326] x86: Booting SMP configuration:
[45109.349327] smpboot: Booting Node 0 Processor 1 APIC 0x2
[45109.351534]  cache: parent cpu1 should not be sleeping
[45109.351689] CPU1 is up
[45109.351709] smpboot: Booting Node 0 Processor 2 APIC 0x4
[45109.353660]  cache: parent cpu2 should not be sleeping
[45109.353798] CPU2 is up
[45109.353817] smpboot: Booting Node 0 Processor 3 APIC 0x6
[45109.355706]  cache: parent cpu3 should not be sleeping
[45109.355854] CPU3 is up
[45109.358648] ACPI: Waking up from system sleep state S3
[45109.360008] ACPI: EC: interrupt unblocked
[45109.373459] ACPI: EC: event unblocked
[45109.374192] sd 0:0:0:0: [sda] Starting disk
[45109.426724] em28xx 1-2:1.0: Resuming extensions
[45109.426726] em28xx 1-2:1.0: Resuming DVB extension
[45109.431387] si2157 8-0060: found a 'Silicon Labs Si2157-A30'
[45109.479309] si2157 8-0060: firmware version: 3.0.5
[45109.479311] em28xx 1-2:1.0: fe0 resume 0
[45109.479312] em28xx 1-2:1.0: Resuming input extension
[45109.697548] ata2: SATA link down (SStatus 4 SControl 300)
[45109.697610] ata3: SATA link down (SStatus 4 SControl 300)
[45109.697640] ata6: SATA link down (SStatus 4 SControl 300)
[45109.698311] ata5: SATA link down (SStatus 4 SControl 300)
[45109.698341] ata4: SATA link down (SStatus 4 SControl 300)
[45111.419410] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[45111.777809] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[45111.779308] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[45111.779316] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[45111.781385] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[45111.781392] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[45111.781633] ata1.00: configured for UDMA/133
[45111.817159] acpi LNXPOWER:16: Turning OFF
[45111.817230] acpi LNXPOWER:15: Turning OFF
[45111.817297] acpi LNXPOWER:14: Turning OFF
[45111.817363] acpi LNXPOWER:13: Turning OFF
[45111.817428] acpi LNXPOWER:12: Turning OFF
[45111.817493] acpi LNXPOWER:11: Turning OFF
[45111.817558] acpi LNXPOWER:10: Turning OFF
[45111.817643] acpi LNXPOWER:0f: Turning OFF
[45111.817708] acpi LNXPOWER:0e: Turning OFF
[45111.817773] acpi LNXPOWER:0d: Turning OFF
[45111.817838] acpi LNXPOWER:0c: Turning OFF
[45111.817903] acpi LNXPOWER:0b: Turning OFF
[45111.817968] acpi LNXPOWER:0a: Turning OFF
[45111.818033] acpi LNXPOWER:09: Turning OFF
[45111.818098] acpi LNXPOWER:08: Turning OFF
[45111.818163] acpi LNXPOWER:07: Turning OFF
[45111.818228] acpi LNXPOWER:06: Turning OFF
[45111.818293] acpi LNXPOWER:05: Turning OFF
[45111.818359] acpi LNXPOWER:04: Turning OFF
[45111.818423] acpi LNXPOWER:03: Turning OFF
[45111.818488] OOM killer enabled.
[45111.818489] Restarting tasks ... done.
[45111.824707] video LNXVIDEO:00: Restoring backlight state
[45111.824708] PM: suspend exit
[45112.207151] e1000e: eno1 NIC Link is Down
[45112.273145] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[45112.476956] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[45113.988160] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[45113.988211] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready